Insite Instrumentation Group, Inc. products

The InsiteIG SCA is a unique analyzer that will accept any standard InsiteIG dissolved oxygen (DO), suspended solids (SS), pH, or ORP sensor. The SCA will automatically configure the sensor for correct operation.a

The InsiteIG DCA is a unique analyzer that will accept any combination of two standard InsiteIG dissolved oxygen (DO), suspended solids (SS), pH, or ORP sensors. The DCA will automatically configure all sensors for correct operation.

The InsiteIG MCA is a unique system that will accept any combination of up to 8 standard InsiteIG sensors (DO, SS, pH, or ORP), and automatically configure for the correct operation. The system allows for flexible and economical process monitoring and control. When paired with the InsiteIG MCR (Multi-Channel Remote transmitter) all data is uploaded to the cloud in real time and can be viewed on any computer or smart device.

The InsiteIG MCX is designed to expand the functionality of the MCA (Multi-Channel Analyzer) by providing additional outputs.

TheModel 10 Sensoris our standard sensor mount. This model features all of the above with a PVC 1-1/2" NPT male mounting thread.

The Model 10PI Sensor is intended for in-line monitoring in a large diameter pipe. The mount is 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 20 psi. See the Single Channel Analyzer (SCA) manual for additional information.

The Model 10T Sensor is intended for in-line Dissolved Oxygen monitoring utilizing a by-pass loop. The by-pass loop is generally configured using customer supplied full port ball valves on both sides of the tee. The supplied tee (as shown) is Schedule 80 PVC, with 3" slip connections for process piping and a 2" female NPT connection for the DO probe. The integrated jet clean with this sensor includes an inline check valve. There is a flow indication groove on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 20 psi. See the Single Channel Analyzer (SCA) manual for additional information.

The Model 10HT Sensor combines the ease of use of a hot tap mount with the reliability of the InsiteIG DO Sensor. The mount is a 2" NPT male thread in 316 stainless steel that works with a customer supplied 2" Thread-O-Let, saddle or existing piping. The integrated jet clean includes an in-line check valve. There is a flow indicator on the back of the sensor mount that should be parallel with the flow. Maximum in-line pressure is 40 psi.

TheModel 15 Sensoris our standard sensor mount. This model features all of the above with a PVC 1-½" NPT male mounting thread. Recommended for:250 - 30,000 mg/l

TheModel 15L Sensoris designed to measure very low solids concentrations typically found in secondary clarifier and plant effluents. This model has a PVC 1-½" NPT male mounting thread. Recommended for:0 - 1500 mg/l.