Interplan d.o.o. products

BIOTIP®is a standard device for biological treatment of wastewater from small villages, hotels, resorts, barracks, camps, schools, food industry, etc. The degree of purification is more than 95% degradation of organic matter, and if it is required, can be performed the procedure of removing additional nitrogen and phosphorus. Operating the device is fully automated with minimal operation and maintenance costs. The device is performed as a buried circular pool covered sprung by a step grate, located in the direction of the sewer when there is no need of performing the pumping station. The device has no moving parts (blowers and electrical boxes are placed in a separate room) for which the shelf life is unlimited, and all materials are resistant to aggressive media.

Treatment plants are manufactured as plastic, waterproof basins divided into chambers by separate mechanical and biological units within which phases of purification of wastewater are carried out. Inside the basin there are inlet screening, the aeration system comprised of air transmission, aerator and air pump. Surfaces of all metal parts are either protected or manufactured from stainless steel. The basin is manufactured from extruded polypropylene plates joint together by welding. The basin is of cylindrical shape, with reinforcement rings on the outside. The construction of the basin is made in such a way that it may withstand the pressure of the ground without additional construction or static measures. Hydraulic system is manufactured from polypropylene pipes and it is situated on the frame of the basin.

Treatment plants are manufactured as plastic, waterproof basins divided into chambers by separate mechanical and biological units within which phases of purification of wastewater are carried out. Inside the basin there are inlet screening, the aeration system comprised of air transmission, aerator and air pump. Surfaces of all metal parts are either protected or manufactured from stainless steel. The basin is manufactured from extruded polypropylene plates joint together by welding. The basin is of cylindrical shape, with reinforcement rings on the outside. The construction of the basin is made in such a way that it may withstand the pressure of the ground without additional construction or static measures.

BIOTIP kompakt is used for biological treatment of sanitary and septic wastewater for the load of 5 – 10.000 IE (Inhabitant Equivalent). The plant is manufactured in full from reinforced waterproof concrete. The entire device is powered by compressed air, supplied from low-pressure compressor. Treated effluent has less than 20 mg (BPK5)/l making the level of purification higher than 95% of organic matter decomposition.

BIOTIP max is a modern conventional device for biological wastewater treatment. The process of treatment with or without recovery of return activated sludge. I made aeration” branches” that provide good mixing bioaeration all parts of the basin. The main objects of the device BIOTIP maxare: space for the plant to fine-mechanical treatment of waste water, swimming pools for additional denitrification, bioaeration pools, secondary settling tanks, warehouses – thickener sludge space for sludge dehydration machine, set the channel for measuring equipment.

Device or a combination of pretreatment with biological wastewater treatment BIOTIP IND uses for wastewater treatment of industrial wastewater. Pretreatment is used when the requirements are that the purified water can be discharged into public sewerage system, a biological treatment with the pretreatment is required when the request to the purified water can be discharged into the recipient category II.

BIOLAGUNA is the most modern method of treatment of municipal and industrial waste water, especially water supply lines and with varying concentrations. They have the advantage of all the parameters by which they evaluate the efficiency of wastewater treatment water: low cost of construction, the highest level of treatment and the lowest operating costs. They are used for wastewater with mainly organic share of the load (eng, for cities with a strong food industry – dairy, brewery, slaughterhouse) and the capacity 2000-100000 ES. Process treatment lagoons are the low-loaded biological process with no refund or return of active sludge. ” I made aeration aeration chains” that provide good aeration mixing all parts of the lagoon. The lagoon sediment is deposited mineralized mud that draws only every 5 -10 years.BIOLAGUNA can be perfectly adapted to the specific requirements for the removal of nitrogen or phosphorus compounds.

Capacity of the device: from 3 ES (equivalent inhabitants). Purpose: conversion of existing septic or collection pits and water storage into a wastewater treatment device. WITHOUT PRIMARY SETTLEMENT AND PRIMARY SLUDGE EVACUATION.

Device for biological purification of wastewater for load of up to 1000 IE manufactured within standard container with length from 2 to12 m. For higher capacity possible installation of two or more containers. WithBIOKONTEJNER it is possible to achieve high level of purification at minimum cost. The device functions independently and does not require constant supervision.  BIOKONTEJNERarrives to installation site fully equipped; it is installed onto simple foundation and connected to sewerage and electricity. It is appropriate for construction sites and temporary objects. May be installed as fully buried or semi-buried.