Jiangsu Peier Membrane Corp,Ltd. products

The water production in the above table refers to the test value of clean water, which is the initial filtration capacity of membrane when the suction negative pressure is 10kPa and the water temperature is 25°C; For different water quality, the water yield will be quite different. The recommended design flux of municipal sewage or similar municipal sewage is 400~500L/?.d, Please consult relevant technicians of Peier for the design flux of industrial sewage. The models for Peier experiment include MF-F-0.1-PVDF (effective area: 0.1?) and MF-F-0.25-PVDF (effective area: 0.25?). Please consult relevant technicians for details.

According to the comparative experimental study of critical flux test, the flux of double outlet membrane element can be increased by 18% ~ 22% compared with the traditional flat membrane element, so as to reduce the capital construction cost of the project; The chemical cleaning effect improves the phenomenon of pollution dead corner of single channel flat membrane element, improves the unit effective utilization rate and prolongs the service life of membrane element; Low transmembrane pressure difference can save operation cost and greatly enhance the market competitiveness of MBR.

PEIER® Flat sheet membrane module, have two type of module which is signal nozzle and double nozzle, see table. According to the membrane surface aeration 0.8m, 1.0m, 1.5m.

Unique mechanism structure. Module upper port extraction and insertion assembly. Integrally encapsulated side plate.

The suction pipe diameter of pel50-200-2s (double-layer) membrane module is DN50. and the suction pipe diameter of pe!50-100-2s (double-layer) and pe150-150-2s (double-layer) membrane module is Dn40.

Double membrane module stacking technology (2012). Double water outlet + double membrane module (2014). Two component formula + double water outlet + double membrane module (2015).

With 0.25m`(MF-F-0.25-PVDF) flat membrane as the core element, the effective use of filtration area can be greatly improved. With folding the whole stainless steel plate, the overall rigidity of the module will be enhanced. The new ""perforated" aeration system which produce balanced aeration, can scour the membrancsurfacc effectively and prolong the membrane cleaning cycle.

Membrane Bio-Reactor,It is a new type of wastewater treatment system with the organic combination of membrane separation technology and biological treatment technology. Membrane modules are used to replace the terminal secondary sedimentation tank of traditional biological treatment technology, maintain high activated sludge concentration in the bioreactor and improve the organic load of biological treatment, so as to reduce the floor area of sewage treatment facilities and reduce the amount of excess sludge by maintaining low sludge load. The membrane separation equipment immersed in the aerobic biological tank is mainly used to intercept the activated sludge and macromolecular organic matter in the tank. The concentration of activated sludge (MLSS) in the membrane bioreactor system can be increased to 6000~12000mg/L or even higher; The sludge age (SRT) can be extended to more than 30 days.

Membrane Bio-Reactor,It is a new type of wastewater treatment system with the organic combination of membrane separation technology and biological treatment technology. Membrane modules are used to replace the terminal secondary sedimentation tank of traditional biological treatment technology, maintain high activated sludge concentration in the bioreactor and improve the organic load of biological treatment, so as to reduce the floor area of sewage treatment facilities and reduce the amount of excess sludge by maintaining low sludge load. The membrane separation equipment immersed in the aerobic biological tank is mainly used to intercept the activated sludge and macromolecular organic matter in the tank. The concentration of activated sludge (MLSS) in the membrane bioreactor system can be increased to 6000~12000mg/L or even higher; The sludge age (SRT) can be extended to more than 30 days.

Membrane Bio-Reactor,It is a new type of wastewater treatment system with the organic combination of membrane separation technology and biological treatment technology. Membrane modules are used to replace the terminal secondary sedimentation tank of traditional biological treatment technology, maintain high activated sludge concentration in the bioreactor and improve the organic load of biological treatment, so as to reduce the floor area of sewage treatment facilities and reduce the amount of excess sludge by maintaining low sludge load. The membrane separation equipment immersed in the aerobic biological tank is mainly used to intercept the activated sludge and macromolecular organic matter in the tank. The concentration of activated sludge (MLSS) in the membrane bioreactor system can be increased to 6000~12000mg/L or even higher; The sludge age (SRT) can be extended to more than 30 days.