Jiangyin Xinda Machinery Co., Ltd. products

LS Single Hook Debeader is used to pull out the bead wires inside tires?sidewalls completely before the cutting and shredding processes. It mainly consists of motor, hook, cross-hole plate, body frame, cylinder, hydraulic station, operation lever, directing wheel.

SG Double Hook Debeader is used to pull out bead wires inside two tire sidewalls completely and simultaneously before next cutting and shredding process. It mainly consists of motor, speed reducer, transmission gears, round hooks, cross-hole plate, support boards, pedestal, bearing pedestal, rolling shelf and control cabinet.

The machine is used to cut all kinds of tires, including steel tire, fiber tires. The tires need to be debeaded before cut into different size of rubber blocks. It mainly consists of motor, rotating platform, rolling shelf, fixed blade shelf, cutting blade shelf, body frame, cylinder, hydraulic station and control cabinet, etc.

ZPS Tire Shredder is used to shred radial tire and fiber tire into tire chips of 50x50mm size in ambient process, the tire needs to be debeaded before shredding. It mainly consists of motor, speed reducer, machine frame, shredding blades, rotary screener, transmission system, etc.

The machine consists of main body, transmission, safety guard, roller temperature adjusting unit, lubrating systemand auto stop protection system.Two rollers are the main working parts of the machine, which are driven by motor via speed reducer and roate in a certain speed difference ratio.

The machine is used to cut the sidewall and tire tread off from passenger tires to prepare for the following pyrolysis process or storage and transport. Structure and Pinciple: The machine consists of main frame body, transmission, clamp device, cutting device, air pressure adjustment device and blades. The tire is immobilized from inner ring and firmly held onto the supporter and rotates driven by motor reducer. The blade fixed on the blade seat, can move in and out by the pneumatic clams with certain cutting angle and depth depending on the tire sizes. The tire will be smoothly cut by the blade while the tire rotates.

The machine is for cutting apart the rim, sidewall and tread from tire, it is the first step machine for waste tire recycling. Structure and Principle: The machine consists of frame body, transmission, clamps and blades. Place the tire with inner ring around the clamps. The adjusting device will fix the whole tire around the clamps, then it rotates driven by motor reducer, before it accelerates, move the blade which is fixed on the blade seat, to cut into the tire with appropriate cutting depth. Features: Blades are made of hard alloy steel, durable.

The machine is used to cut the long strips( cut from double tire tread) into small blocks of certain size. Features: Double tire tread is often seen in retreaded tires which have with two layers of treads on top of each other. Common Block Cutter cannot cut double tread, the blade wear out very soon and capacity is low. In order to better serve the customer demands, we have successfully developed the machine to be able to cut double treads. The machine is high quality, easy to operate, durable, low noise, no pollution and steady performance. It is an ideal equipment for waste recycling. The blades are made of hard alloy steel which can be repeatedly used after repairing and polishing.

The machine is used to cut the long strips( cut from double tire tread) into small blocks of certain size.

The machine is used to mix rubber granules for making rubber brick. Feed rubber granule, dye powder and adhesive, then mix them evenly. After this, you can mold rubber brick of different specification with them.