Ketmak Makine ve Tesis Imalat San. Tic. A.S. products

Filter presses are the oldest method for sludge dewatering. Filter presses have become the most common equipment of treatment and mineral enrichment plants by means of able to discharge nearly dry cakes, practical usage, automatic discharge mechanisms and able to be applied different processes.

Thickener is a cylindrical plant (pool) with large diameter in which just the colloidal particles remain as a result of settling of suspended solids’ important portion in the slurry and which provides turning back of water to the process by effusing the partial treated water from whole circle. Moreover, scraping wings at the decayed bottom transport large particles to the central part and so seperately disposal of that sediment is provided.

Reducer Moment 120.000 Nm. Shaft Diameter 200 mm. Revolution Power 0,75 Kw. Lifting Power 1,5 Kw. Scrapper Speed 2,5 m/min. Protection Class IP 55. Lifting Mechanism Stroke 500 mm.

Waste water collected in the equalization pool is pumped to the sedimentation tank regularly by the submersible pump in that pool. During the pumping, particles in wastewater decompose by injecting flocculant to the system (dosing) and weighing dirty particles are collected in the conical part of the tank as settling faster than the normal speed; and finally clean water that are collected at the top part passes to the clean water tank standing near the sedimentation tank. By means of special inner structure of our sedimentation tanks, it is prevented that the settled particles to foul the upper flow as turning to the upper part due to waste water fed from the top. We produce sedimentation tanks with various dimensions according to need.

Polyelectrolyte used as flocculant is used commonly in drinking water and waste water treatment.

Type Diaphragm. Capacity 470 lt/h. Power 0,25 KW. Current 380V, 0.5A. Motor Revolution 1450 d/d. Dosing Quantity Adjustable.
Entrance Size DN25. Exit Size DN25. Diaphragm Size 115mm. Diaphragm Strock 10mm. Diaphragm Material Rubber coated with teflon. Protection Class IP 55.

Motor 13/17 KW. Cooling Type Water cooling. Exit Pressure 6 bar. Flowrate 85 m3/h. Impeller Size Ø226 mm. Protection Class IP 55.

Motor Revolution 1450 rpm. Pump Revolution 1950 rpm. Pressure (max) 12 bar. Flowrate 115 m3/h. Sealing Type Mechanical Seal (Tuc-Tuc). Cooling Type Water Cooling. Power 37 Kw.

Piston Diameter 350 mm. Piston Number 2. Max. Hydraulic Pressure 250 Bar. Max. Sludge Pressure 16 Bar. Max. Flowrate 90 m3/h. Electricity Power 18,5 kW. Feeding 380 V, 50 Hz. Protection Class IP 55. Hydraulic Oil Storage  400 lt. Cooling Type     with Water. Revolution Ratio 1/17.

Pumping of domestic and industrial raw wastewater. Wastewater treatment plants. Pumping of rain water. Drainage and releasing works.