Kitagawa America LLC products

Air sampler ASP-1200 is designed to be used with detector tubes, DNPH tubes and/or charcoal tubes for indoor air quality and working environment measurement.

Flow visualization is common for air flow check in room and function check of local exhaust ventilation, but heat source is not suitable. The Model AS-1 is designed to check velocity and direction of air flow with a smoke tube (No.301) which reacts with vapour in the air and generates white smoke.

Flow visualization is common for air flow check in room and function check of local exhaust ventilation, but heat source is not suitable. The Model AS-2 is designed to check velocity and direction of air flow continuously with a smoke  tube (No.301) which reacts with vapour in the air and generates white smoke.

Have you ever experienced you were uncomfortable when you had to check air flow with a smoke tube where ventilation fan or hood was unreachable or was located at confined space? With a switching operation on the pump, air flow check continuously or intermittently up to 2 metres is possible.

For flow visualization check of air flow at room or local exhaust ventilation. Used with Kitagawa Air Flow Indicator Model AS-1/AS-2/AS-3. Meets OSHA protocol for respirator fit testing.

An air flow checker to check suction power, air flow direction and speed from draft, duct, ventilation fans and hoods using white smoke.

800B is designed for sampling and measurement of organic solvents in air with personal sampler for industrial hygiene (conformed to NIOSH requirements). Sample air containing vapour of organic solvents is passed through a glass tube packed with charcoal which adsorbs the solvent. Adsorbed solvent is recovered with desorption solvent leeching followed by gaschromatographic analysis. Useful for sampling organic solvent vapours.

801 is designed for sampling organic solvents in environmental air, particularly for polar solvents such as Methanol and Acetone which cannot be sufficiently adsorbed onto charcoal. Organic solvent vapour is adsorbed onto the silica gel while passing through the tube. Adsorbed solvent is recovered with a desorption solvent followed by gaschromatographic analysis. When sample air corresponding to 60 to 80 & of the amount causing breakthrough is passed, the colour begins to change from blue to pink by the moisture from the silica gel side predicting breakthrough.

P-20 includes; Resinous gas collector, one collecting bottle, thermometer. P-24AP includes; AP-20 gas aspirating pump, five collecting bottles, thermometer, carrying case. Measurement for solvent concentration is easy by measuring the head space gas with the detector tube.

*Explanation for Measurement methods. Immersion method: Uses capillarity by immersing a part of detector tube into the sample liquid. Suction method: Suction of the sample liquid into the detector tube by attaching a rubber ball on one end of the tube. Injection method: Injecting the sample liquid into the detector tube by a syringe.