LaCont Umwelttechnik GmbH products

For the storage of water-endangering and flammable liquids in small containers Trough made from 3 mm galvanized sheet steel For placing flat on the floor PE trough inserts are available for all models for the storage of acids and alkalis.

For the storage of water-endangering and fl ammable liquids. Made from 3 mm sheet steel. Removable galvanized grid. Ground clearance 100 mm for internal transport. Corrosion protection by primer coating and painting or by fire-galvanized sheet steel. PE inserts are available for all models for the storage of acids and alkalis.

For the transport of water-endangering and flammable liquids; Base sump tray made from 3 mm sheet steel. Base sump tray according to WHG - U-sign according to Stawar. Removable galvanized grid. Corrosion protection by primer coating and painting or by fire-galvanization. Equipped with 2 fixed and 2 swiveling castors and push bar as standard.

For the storage of water-endangering liquids; Base sump tray made from 3 mm sheet steel. Base sump tray according to WHG - U-sign according to StawaR. Ground clearance 100 mm for internal transport. Lockable versions also suitable for storage outdoors. Sump capacity 220 liter. Corrosion protection by primer coating and painting of sump pallet. Weather-proof superstructure made from galvanized sheet steel, with venting slots in the side walls. Compartment for documents in the door(s) as standard.

Load tests on rotationally molded polyethylene sumps for achieving official constructional approval. A prerequirement for obtaining a general constructional approval from DIBt Berlin was successfully completed load tests. The LACONT PE sumps were tested according to the latest specifi cations and requirements of DIBt Berlin by an officially certified testing, monitoring and certification institute (test laboratory accredited by DAP - Deutsche Akreditierungssystem Prüfwesen).

For horizontal storage of steel drums (60 liter or 200 liter capacity). 1-drum models made of black PE. 2-drum models made of yellow PE.

The use of 60 litre drums when handling hazardous substances on a day-to-day basis is widespread. The 60 L filling stations have been developed in order to store these drums and fill off liquids from them in safety.

Placing a 200 liter drum horizontally on the top storage level is easier said than done. Using the fork tips of a fork-lift truck involves a high environmental risk and is therefore forbidden. The stacking rack is an officially approved solution that meets the practical requirements of day-to-day work.

These compact storage depots have been specially developed for drum and KTC storage on the basis of our practically-proven safety storehouses. Their generous dimensions mean that it is possible to store 200 L drums directly above the collection trough or also on Euro or chemical pallets. There is also sufficient space available for storing large containers (KTC / IBC).

For the storage of water-endangering and flammable liquids in small containers. Base sump tray made from 3 mm galvanized sheet steel. Base sump tray according to WHG - Ü-sign according to StawaR. For placing flat on the floor. PE inserts are available for all models for the storage of acids and alkalis.