Laird Manufacturing products

490 CUFT Mixing Chamber (70"Side Wall). 5/8" Floor Thickness. 3mm Stainless steel on floor. Two Heavy Duty Planetary Gear Boxes . Integrated with a 90 Degree Bevel Gear. Two Vertical Augers with Stainless Steel on the Perimeter. Stainless Steel Cap (3mm) on the First Three Feet of the Leading Edge. Hydraulically Operated Chain Discharge Conveyor in the Front that discharges to the Left Hand Side (Stainless Steel). Adjustable Discharge Conveyor on 8 Bearings. PTO Shaft with a 5/16" shear-bolt (1000 RPM). Blue Brute bearing mount with drive shaft to planetary gear. 2 X 385/65R-22.5 Tires on a Single Axle. Mechanical Jack. 4 X10,000 lb Capacity Load Bars with 1 % Accuracy. 10 High Quality Busatis Blades (5 per auger). 4 Hydraulic Hoses. Painted White with Blue Trim. 2 Counter Knives. Ladder in rear.

555 CUFT Mixing Chamber (7FT Side Wall Plus 8" Belting Extension). ZA" Floor Thickness. Stainless Steel Liner on Floor (3mm). One Heavy Duty Planetary Gear Box with 90 Degree Bevel Gear. One Vertical Auger with Stainless Steel on the Perimeter Stainless Steel Cap (3mm) . on the First Three Feet of the Leading Edge. Hydraulically Operated Chain Discharge Conveyor in the Front that discharges to the Left Hand Side (Stainless Steel). Adjustable Discharge Conveyor on 8 Bearings. PTO Shaft with a 5/16"shear bolt (1000 RPM). Blue Brute bearing mount with drive shaft to planetary gear. 4 X 235R/17.5 Tires on a Single Axle. Mechanical Jack. 4 X10,000 lb Capacity Load Bars with 1 % Accuracy. 5 High Quality Busatis Blades Ladder and Rear Bumper. 4 Hydraulic Hoses Painted White with Blue Trim 2 Counter Knives.

¼` Bottom. 10 Gauge Upper Sides. ¼` Rear. 3/16` Front. Body Support Frame. ½` Auger Flighting on Top and Bottom. 8` Auger Tube (Top and Bottom #80). 3 7/16` Main Drive Bearings and Shafts. 2 7/16` Idler Bearings. 140H and 100H Main Drive Chain in Oil Bath. Twin Auger Discharge (Hydraulic). 2 - 18` Heavy Duty Plate Magnets on Discharge. Hydraulic Doors. Stainless Steel Bottom Liner 10 Gauge (3 mm). Stainless Steel Discharge 10 Gauge (3 mm). 4 Digistar Weigh Bars. Heavy Duty Single Axle Running Gear (Trailermount only). Spline Shaft P.T.O. (Trailermount only).