LAKOS Filtration Solutions products

Cooling Water Filtration for Industrial Applications. LAKOS eJCX Systems keep cooling tower basins free of suspended solids that cause scale, corrosion, fouling and biological activity. Controlling these factors leads to lower maintenance, improved chemical effectiveness, longer cooling tower and downstream equipment life, and a significant decrease in long-term water and energy costs.

The eJPX is a higher efficiency version of the JPX Separator that removes up to 98% of solids 44 microns (325 mesh) and larger in a single pass.  The eJPX is the ideal solution for industrial and commercial applications where finer solids filtration is required. LAKOS eJPX Separator’s come pre-plumbed for quick installation of the SmartPurge System which automatically detects solids levels inside a Separator and activate the purge valve only when needed. This saves valuable liquid during purge cycles, by only purging when needed.

The LAKOS Industrial JPX-JPL line of Separators are designed to fit a wide variety of commercial applications ranging from the oil and gas industry to the primary metals industry and everything in between. The JPX-JPL are the ideal solution to increase process efficiency, reduce maintenance costs, and lower energy costs for an array of industrial and commercial applications. Filtration performance is independently tested and rated to remove up to 98% of solids 74 microns and larger in a single pass. Continuous centrifugal filtration with no backwashing or internal moving parts; automated periodic purging eliminates maintenance. Preferred filtration choice for small orifice and spray nozzle protection, heat exchangers, pits, sumps, basin, pre-filtration, and waste minimization.

Filtration for cooling tower basins and remote sumps in HVAC applications. TowerClean and TowerCleanPLUS systems eliminate the need for manual basin cleaning by separating solids out of cooling tower basins and remote sumps using strategically placed LAKOS HydroBoosters. Accomplished by preventing solids accumulation in the basin through continuous, active sweeping action that reduces the environmental conditions that breed harmful bacteria, such as Legionella (Legionnaires disease).

Our highest efficiency centrifugal separator removes fine solids* (25 microns and larger) from HVAC open and closed loops. This Separator reduces equipment operating costs, maintenance costs, and water use.

LAKOS Premium Efficiency eTCX Tower Clean Systems keep cooling tower basins free of suspended solids that cause scale, corrosion, fouling, and biological activity. Controlling these factors leads to lower maintenance, improved chemical effectiveness, longer cooling tower and downstream equipment life, and a significant decrease in long-term water and energy costs.

Flow Range: 16 – 12,750 US GPM (4 – 2,895 m³/hr). Maximum Pressure: 150 psi (10.3 bar). Filter performance rated to remove up to 98% of solids, 74 microns and larger in a single pass, and up to 99% of solids 44 microns and larger in recirculating applications. Continuous centrifugal filtration with no backwashing or internal moving parts; automated periodic purging eliminates maintenance. Optional materials of construction and ASME code available. Low and steady pressure loss; as low as 3 psid. Our standard efficiency separator removes fine solids* (45 microns and larger) from HVAC open and closed loops. This reduces equipment operating costs, maintenance costs, and water use. * 2.6 specific gravity and heavier

Ideally suited for smaller system applications, side-stream installations, and individual equipment protection. LAKOS ILB-ILS Centrifugal Separators are the popular choice for removing sand, grit, and other fine solids from sources of process water/liquid systems, removing up to 98% of particles 74 microns and larger. When used for heavier solids like metal shavings and lead chips you can expect even better results. LAKOS ILB-ILS unique centrifugal style of filtration is not only super efficient, but also trouble-free in its design.

LAKOS Pump Protection Separators (PPS) remove sand and grit that can shorten the life of a submersible or turbine water well pumps. When sand threatens the performance of a pump, PPS Separators can help solve the problem and extend the life of the pump. Using a patented centrifugal design, the PPS controls the sand from entering the pump inlet, before it can chew up impellers and bearings and other pump components. This keeps the pump operating at maximum efficiency.

Dramatically extend submersible pump life, save energy, and remove sand from well water with the LAKOS SUB-K pump protection separators. Using patented centrifugal action, troublesome sand is removed from the water before it can enter the pump, damage impellers, and go downstream to your house or ranch. Trouble-free and effective, LAKOS Sub-k separators are easy to install into water wells as small as 4 inches I.D. Flow Range: 3-99 GPM (.7 – 23 m3/hr).