Levelstate Systems Ltd products

Levelstate ELS 300 provides a reliable and cost effective means of sensing water/steam level in high pressure/temperature applications. Pressure parts available upto 207 bar at 370? as standard (optional: super-critical). With detection upto 4 channels (optional: upto 8 channels) in Type 300+, the installed cost per detection point is appreciably lower. ELS NANO (single channel) is an effective and economical replacement to the float type level switch.

Levelstate ELS 400+ provides a reliable and cost effective means of sensing water/steam level in high pressure/temperature applications. Pressure parts available upto 207 bar at 370? as standard (optional: super-critical). With detection upto 4 channels (optional: upto 8 channels) in Type 300+, the installed cost per detection point is appreciably lower. ELS NANO (single channel) is an effective and economical replacement to the float type level switch.

Levelstate ELS NANO provides a reliable and cost effective means of sensing water/steam level in high pressure/temperature applications. Pressure parts available upto 207 bar at 370? as standard (optional: super-critical). With detection upto 4 channels (optional: upto 8 channels) in Type 300+, the installed cost per detection point is appreciably lower. ELS NANO (single channel) is an effective and economical replacement to the float type level switch.

Water Columns are designed to promote condensation of saturated steam with minimum drop in temperature. Circulating condensate in the Water Column flushes the vessel and Probes continuously. This prevents build up of sediment and eliminates the need for periodic blowdown. The design and fabrication meets the requirement of ASME B31.1 Power Piping Code.

As the primary element in sensing level signals, conductivity Probe is the heart of electronic level indicating systems. Probes are made of stainless steel with high purity zirconia/alumina ceramic insulator exhibiting a high degree of chemical inertness at elevated temperature. Pressure sealing is achieved through ceramic to metal vacuum brazing.

The Electronic Unit processes the input signal and provides display, relay and analog outputs. Features are available depending on site requirement including no. of channels, single or dual power supplies, process and system fault, alarm and trip relay outputs, time delay settings, conductivity settings. The Electronic Unit is housed in an IP65 enclosure as standard.

The Remote Display Unit repeats the display of the Electronic Unit. The IP20 Remote Display Unit is intended for control room location. The IP65 Remote Display Unit can be located in the field like fireman`s floor, feedwater control station etc. Two Remote Display Units can be powered by the Electronic Unit upto 500 meters. Additional Remote Display Unit with length exceeding 500 meters also available on request.

Levelstate provides high temperature resistant PTFE insulated multi-core Probe Cable. These are available in 10 meters length as standard. Custom lengths can be supplied maximum upto 30 meters.

Levelstate EDLI is an advanced electronic water level monitoring system. An EDLI system includes multiple Probes fitted to a Water Column and connected to an Electronic unit, which is widely accepted as a reliable & maintenance free equipment. Pressure parts available for applications upto 207 bar at 370°C as standard. Electronics available in various configurations and include Type 201, Type 202 and Type 202B.

Levelstate Colour Port Type Water Level Gauges(DWLG) provide a direct reading of the water level and are suitable for steam/water applications. Levelstate Gauges are reliance and maintenance free thereby minimising operating costs for the user.Levelstate DWLG is available in various pressure ratings, which used along with the high intensity illuminating device and accessories makes it one of the most reliable and user friendly systems available. Gauge Type 300 is available for pressure rating upto 207 bar @ 370°C.