Massenza Drilling Rigs products

Double action duplex piston mud pump made up of steel fluid and power ends, shaft with eccentrics, connecting rods and crossheads made out of special steel and mounted on bearings, liners,pistons, valves and valve seats made out of heat treated alloy steel, oil bath lubrication and auxiliary forced lubrication system by means of a geared pump, pulsation dampener, rod lubrication tank, mud suction pipework (diam. 8”) with flexible hose i.d. 200 mm complete with rapid joint and suction strainer. Capacity max 2240 lt/min - Pressure max 20 Bar (7”1/2 pistons).

Service rig used for rehabilitation of water wells, cleaning, fishing, pump testing and bore hole washing. The rig can be supplied with various optional based on the customer`s specific requests. All the accessories needed for completing the well can be mounted onboard. Among the numerous optional there is the electrical generator, the welding machine, the air compressor, water and foam pump. The rig can be supplied also with different types of winch: the one with high pullback capacity, the wireline type with up to 800 meter of wire or the free fall type and fixed or hydraulically tilting drill pipe boxes.

The Loop Feeders is a mechanical hydraulically driven machine that assists with the insertion and abstraction of geothermal borehole probes / loops and grouting tremie into pre-drilled boreholes. The Loop Feeder is clamped in the top jaw of a geothermal drilling rig and attached hydraulically and uses the power from the drilling rig to drive.

The MM4 is more than a multipurpose drilling rig: thanks to its special design it can perform in all the directions micropiles, anchors, geotechnical investigations and also water wells and geothermal boreholes.

Solidly constructed and versatile the rig is used for various applications: small water wells, geothermal applications, soil investigations, coring and micro piles. The rig is designed for working safely with various drilling methods: direct circulation, down the hole hammer drilling and augering. Thanks to the remote radio control the rig can be completely move from the ideal working position, for a perfect sight of the drilling movements. Numerous options are available to personalize the rig for every drilling requirements.

The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and auger drilling. Numerous optionals are available to personalize the rig for most drilling requirements including mast extensions (folding or telescopic), SPT penetrometer, various foam and mud piston pumps and fixed or hydraulically tilting drill pipe boxes.

The rig is very compact with moderate dimensions and high technical specification. This permits the rig to be used for various applications: water wells, micro piles geothermal and geotechnical drilling. The rig can be either crawler or truck mounted. It is designed to work with several drilling methods: direct circulation, coring, down the hole hammer drilling and augering. All controls are located for ease of operation and safety with the rig positioning controls on a fixed panel and the drilling controls on a remote rotating arm. Numerous options are available to personalize the rig for most drilling requirements including mast extensions (folding or telescopic), SPT penetrometer, various foam and mud piston pumps and fixed or hydraulically tilting drill pipe boxes.

Although the rig is of moderate dimensions, which allows it to operate in restricted locations, it is extremely powerful. Due to its robust engineering and reliability it is capable of drilling in difficult conditions to depths normally beyond a rig of this size. The rig can be set up in various configurations, depending on the client’s need. It is possible to install on board duplex mud pumps, centrifugal pumps and lubricators for down the hole hammers. The rig can be either crawler or truck mounted with the option of Massenza’s automatic drill pipe changer. The rig is designed to work with several drilling methods: direct circulation, down the hole hammers and augers. It is suitable for water well, geotechnical, geothermal drilling applications and coring for mineral research.

It is a very versatile drilling rig used for various applications: water wells (beyond 250 m), geothermal applications, geotechnics and seismic. The rig can be either crawler or truck mounted and he can work by all the main drilling methods: mud pump, coring, augering, down the hole hammer drilling using an adequate compressor. All controls are located for ease of operation and safety with the rig positioning controls on a fixed panel and the drilling controls on a remote rotating arm or extension cable.