Motec - AMETEK products

The MC3000B-VA camera is a heavy duty camera made of VA steel, and therefore unique in the Motec camera series. Its rust-proof stainless steel alloy housing is ideally suited for applications in extreme weather and environmental conditions, as well as for special requirements in terms of hygiene. The housing is pressure washer-proof and IP69K-tested; the camera can withstand impacts up to 50 g and oscillations up to 30 g. The energy-efficient automotive CMOS sensor delivers an excellent image Quality in operating temperatures between -40°C and +85°C. The integrated, automatically controlled 2.5 Watt screen heater ensures perfect visibility at temperatures below 5°C.

The MC3000C-IR is a night-vision heavy-duty camera with built-in infrared LEDS. The camera automatically switches to LED mode as darkness sets in and delivers sharp black and white images. During the day, it gives crystal-clear images in colour. LED cameras are used everywhere where additional headlights are not to be or cannot be installed.

The camera MC3050B-4-VKMS is a heavy-duty camera, specially developed for front implements. Unlike the proven camera series MC3000B, its front pane has a double-sided optical interference coating. This sophisticated coating prevents optical reflections which could occur on the glass surface by sunlight or artificial light. In addition to this, the camera is equipped with a highend, low stray light lens. Therefore, reflections can be reduced to a minimum. Even at low sun or glaring headlights, the camera still provides realistic images. Thus, the camera MC3050B-4-VKMS is an essential part of the camera monitor system for front implements. So the camera system passed all tests prescribed by the German Ministry of Transport.

The MCDE3000 is an Ethernet camera suitable for mobile use. It can be utilised in networks compliant with IEEE 802.3 (LAN). Fitted with intelligent Image processing and dynamic overlays, it functions as a smart sensor in a variety of applications. For example, it can be integrated into existing video monitoring systems or used for video Streaming across large distances. The MCDE3000 meets the AEF requirements for future digital camera interfaces.

The MCDE7000-FullHD is a FullHD Ethernet-Camera suitable for mobile use. It can be utilised in networks compliant with IEEE 802.3 (LAN). Fitted with a high optical dynamic range (HDR) and dynamic overlays, it is used in a variety of applications. For example, it can be integrated into existing video monitoring systems or used for video streaming across large distances – quality “Made in Germany“.

The MC9000 fork camera is designed especially for forklift trucks and is mounted on the inside of the fork. This places the camera at the eye level of the pallet. Based on its pinhole size opening in the housing, the lens is protected from damage that may be caused by lattice boxes or pallets.

The MC9150P camera is especially designed for forklift trucks and is mounted on the back of the fork. The 50° viewing angle makes it possible to observe both forks. Based on its pinhole size opening in the housing, the lens is protected from damage that may be caused by lattice boxes or pallets.

The MC9250 is mounted inside the fork tip, meaning it is always at the same level as the pallet. The pinhole lens and the associated pin-prick sized opening in the casing reduced the risk of load carrier damaging the lens.

The Motec Workview System is a compact, wireless camera monitor system suitable for any type of crane and crane application. The digital radio system MAB2000-Set-2 is the basic module. The modular system design allows the addition of further components such as monitors, cameras, pendulum units and VCR. This allows the system to be individually adapted to special requirements.