Benchtop Extraction Systems
FX Extraction Arm 32
The Nederman BenchTop arms can be used in every type of environment, ranging from assembly stations, where solder fumes are extracted, to laboratories, where protection against highly corrosive or noxious gases is vital.
FX Extraction Arm 50
Made of light-weight anodized aluminium sections, with two or three adjustable, plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.
FX Extraction Arm 75
Made of light-weight anodized aluminium sections, with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.
FX Extraction Arm 100
Made of light-weight anodized aluminium sections with two or three adjustable plastic friction joints. For extraction of fumes, etc. when soldering, gluing, or working with solvents. Can be connected in single applications, in systems, and with or without filter. Easily mounted to a workbench or similar. Can be mounted standing, hanging or attached to the wall. Flexible in all directions and simple to position. Easy to dismantle for easy cleaning.
Air Extraction Kit Original 500
Designed for one smaller workplace, where the demand for airflow is up to 30m³/h per arm. The kit consists of an extraction arm FX 32 with table bracket and a CX 5500 filter and fan unit. (For more information see separate product section.) One speed on/off. Complete with hose and extraction hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.
Air Extraction Kit Original 1000
Designed for two smaller workplaces for simultaneous use, where the demand for airflow is up to 42m³/h per arm. The kit consists of two extraction arms FX 32 with table brackets, filter unit and fan N3. (For more information see separate product section.) The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.
Air Extraction Kit Original 1500
Designed for three smaller workplaces for simultaneous use, where the demand for airflow is up to 38m³/h per arm. The kit consists of three extraction arms FX 32 with table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction hoods. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.
Air Extraction Kit for Airflow Control
Designed for one workplace, where the demand for airflow is up to 100m³/h. The kit consists of a FX 50 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and combination hood. The hood is made of clear plastic, which increases the visibility (not the ESD hood). Also available in an ESD version for the electronics industry.
Extraction Kit Original 2500
Designed for two workplaces, where the demand for airflow is up to 75m³/ h per arm. The kit consists of two extraction arms FX 50 with swivel, table brackets, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hoses and extraction nozzles. Also available in an ESD version for the electronics industry.
Extraction Arm for Airflow Control
Designed for one workplace, where the demand for airflow is up to 150m³/h. The kit consists of an extraction arm FX 75 with swivel, table bracket, filter unit and fan N3 (for more information see separate product sections). The speed of the fan is variably controlled by a speed controller. Complete with hose and extraction nozzle. Also available in an ESD version for the electronics industry.
