Ningbo Pisces Food Machinery Co., Ltd.
5 products found

Ningbo Pisces Food Machinery Co., Ltd. products

Process Flow of Canned Yellow Peach

Empty Tank Unloading and Cleaning Machine

The machine is mainly tanker machine, conveyor platform, cans washer, operation and the department of electric control system, etc., for a variety of sizes tinplate cans with the cleaning. It has the characteristics of high productivity, low labor level, reliable operation, low damage rate of empty cans, cleanliness, safety and hygiene and automatic continuous, etc.

Pre-Cooker System

Production capacity: 5 tons / hour. The box board δ2.5, column with a square tube 40×80×2,both ends of the steam with a steam outlet, the lid δ1.2, in addition to the rest of the other are used SUS304 material production. There are two sewage at the bottom, the bottom of both sides of the dump outfall to the sewage. Leave the cleaning distance on both sides. Using three sides of the insulation, the lid is not insulation. Conveyor with 2.5-inch large roller stainless steel high fence net chain conveyor, network cable spacing of 63.5mm, the center of the chain from 1400, both sides of the shield 180mm high, thick 3mm. Mesh with a high 180mm blade, plate thickness of 2mm folded. Pre-cooking section set pressure hole plate, the top set cover. Pre-cooking time 5-20 minutes adjustable. Motor power: 2.2kw. Pre-cook temperature is automatically controlled, with the use of coil heating. Dimensions:11000×1800×1200 (length×width×height).

Brush Flap Machine

The machine is mainly used for the flap of the yellow (white) peach after the flap, using the brush rolling flap, so that the raw material will not be damaged. In the middle, there are 32 rolling brush to feed forward the raw material, including 3 big brush roll turned fruit, big brush up and down adjustable, the following has access to the bucket, the machine using the tilt, from high to low will not block material. Side plate apply with 3mm304 plate folding into a groove steel, rack with 60×40×2square tube welded together, in addition to reducer, brush roller, transmission chain, the rest are made of 304 materials, imports 1750 with hoist, export high 1350 with shower machine. Fruit turn rate: 95-98%. Machine power: 1.1kw adjustable.

Spray Shower Machine

Production capacity: 5 tons / hour. Manufactured with (SUS304) stainless steel, group welded box structure, in which the rack foot is 40×80×2square tube. Box thickness of δ2.5, weld pickling treatment, the outer surface of the box  polishing. Leaf broom spacing on both sides. Net belt conveyor, mesh belt spacing of 38.1 mm large roller chain, the material is stainless steel, mesh with a center distance of 1500 mm, imported height and turn the machine with; conveyor line speed of 5-20 m / min Tune. 1 meter at the imported side with artificial fruit section. Alkaline for the waterfall structure, do not damage the surface of raw materials, a total of 8 alkali boxes for 16 times alkali leaching.

Orange Canned Processing Technology

Clean and Heat Orange Machine

Production capacity: 5 tons / hour or 8 tons / hour. Heating orange time: 13 ~ 65 seconds (adjustable). Heating orange temperature: 80 ~ 95 ℃. Inlet and outlet height: 750 / 350mm.