Oxyline Sp. z o.o. products

The filtration half mask XR 350 FFP3 NR is a non-sterile single-use medical product, type II R. It complies with the requirements of the EN 14683:2019 with a limited duration of use, up to a maximum of 8 hours. It has a bacterial filtration efficiency (BFE) of ≥ 98.0%. The respirator is approved for use in medical environments where there is a risk of splashing bodily fluids. Filtering half-mask XR 350 FFP3 NR is also a PPE category III and complies with the requirements of the EN 149:2001+A1:2009 standard.

The filtration half mask X 210 FFP2 NR D is a non-sterile single-use medical product, type II R. It complies with the requirements of EN 14683:2019 with a limited duration of use, up to a maximum of 8 hours. It has a bacterial filtration efficiency (BFE) of ≥ 98.0%. The respirator is approved for use in medical environments where there is a risk of splashing bodily fluids.

The OxyChem C310 overalls provide limited * chemical protection, type 4/5/6. It is made of fabric laminated with microporous film (MPFL) with a mass of 63g/m² (+/- 2g/m²) outer layer: polyethylene film inner layer: polypropylene fibers that have resistance to penetration of infectious agents. In addition, the seams are taped so that the suit has 4 TYPES of protectio, thanks to this work safety is much better. Oxychem C310 protects against radioactive dust and has antielectrostatic properties. Its design has been designed in such a way that it provides the highest level of safety, ergonomics and comfort during work.

The half mask respirator X 310 FFP3 NR half mask is a non-sterile single-use medical product, type II R. It complies with the requirements of EN 14683:2019 with a limited duration of use, up to a maximum of 8 hours. It has a bacterial filtration efficiency (BFE) of ≥ 98.0 %. The respirator is approved for use in medical environments where there is a risk of splashing bodily fluids.

The half mask is designed in such a way as to enable easy breathing throughout the work shift. The anatomical shape and the nose clip, as well as the internal sealing foam, make the half mask easy to fit to most face shapes, so that the necessary tightness can be ensured.

The half mask is designed in such a way as to enable easy breathing throughout the work shift. The anatomical shape and the nose clip, as well as the internal sealing foam, make the half mask easy to fit to most face shapes, so that the necessary tightness can be ensured. This product is detectable.

The half mask is designed in such a way as to enable easy breathing throughout the work shift. The anatomical shape and the nose clip, as well as the internal sealing foam, make the half mask easy to fit to most face shapes, so that the necessary tightness can be ensured.

The respirator DONALD FFP2 NR D BLUE is designed to protect respiratory system against harmful effect of dust, solid and liquid aerosols when OEL is ≥0,05 mg/m 3 and the concentration of dispersed phase of aerosol does not exceed, 10 x OEL (Occupational Exposure Limit), 10 = APF (Assigned Protection Factor), 12 = NPF (Nominal Protection Factor).

The half mask is designed in such a way as to enable easy breathing throughout the work shift. The anatomical shape and the nose clip, as well as the internal sealing foam, make the half mask easy to fit to most face shapes, so that the necessary tightness can be ensured.

The half mask is designed in such a way as to enable easy breathing throughout the work shift. The anatomical shape and the nose clip, as well as the internal sealing foam, make the half mask easy to fit to most face shapes, so that the necessary tightness can be ensured.