OZDOGANPLAST PLASTİK products

Sprinkler irrigation is an irrigation system that consists of spraying the water needed by the plant in the form of rain under a certain pressure. Water is transmitted by pressure to the sprinkler heads. The individual sprinkler system consists of water supply, pump unit, main pipeline, vertical pipeline and sprinkler heads. Özdogan Sprinkler Irrigation Pipes manufactured according to TS EN 12201-2 standards are produced in 50-160 mm diameters of 5 and 6 mt lengths using high density Polyethylene (HDPE). The operating pressure is 6 atmospheres. Ozdogan Sprinkler Pipes are very easy to install, their interconnection is achieved by combining a rubber seal and latches on both sides

Corrugated Pipes are manufactured in two classes as SN 4 and SN 8 according to TS EN 13476-3 standard. It is produced from a diameter of 100 mm to a diameter of 800 mm using high-density polyethylene raw materials. Koruge pipes are used not only in wastewater removal systems; their high strength strength, earthquake resistance, etc. it is used seamlessly in many different flow systems with its flexible structure that is not affected by ground tremors, its superior resistance to chemicals, its suitability for environmental protection and its 50-year working life.

Corrugated Pipes are manufactured in two classes as SN 4 and SN 8 according to TS EN 13476-3 standard. It is produced from a diameter of 100 mm to a diameter of 800 mm using high-density polyethylene raw materials. Koruge pipes are used not only in wastewater removal systems; their high strength strength, earthquake resistance, etc. it is used seamlessly in many different flow systems with its flexible structure that is not affected by ground tremors, its superior resistance to chemicals, its suitability for environmental protection and its 50-year working life.

It is the job of laying sheathed pipes from under the ground, without damaging the superstructure. Horizontal drilling is generally preferred to be used in areas such as highways, highways, open areas to traffic, lakes, lakes, rivers, railway tracks, aircraft fists in short, it is preferred to be used in areas with high cost or difficult to excavate. The most important purpose of this is to make the cost more affordable by making the horizontal drilling process without damaging the place at all, instead of breaking the asphalt with the help of both a bucket and an excavator.