PAMAS - Partikelmess- und Analysesysteme GmbH products

The PAMAS 4132 is used as a particle counting system for Single & Multipass Filter test rigs. The standard system fits in the test rigs of filter manufacturers. In case of a Single Pass Filter Test, the liquid passes the filter only once and then is deviated to the outflow. For ß-ratio-analyses, the Single Pass Filter Test can be performed with two PAMAS 4132 instruments.

The PAMAS FSA-2002 Floc Size Analyser has been designed for coagulation and water treating systems. Water is often treated by adding flocculents. These flocculation agents are used to gather solid undissolved contaminants to particulate agglomerates. Before the process of filtration commences, the floc size and quantity is analysed using the PAMAS FSA-2002. Precise information about the particle size helps to verify and to determine if the process of coagulation is complete or if further flocculation agents must be added. The PAMAS FSA-2002 consists of the particle counter PAMAS 3116, the particle sensor PAMAS HCB-LD-900, a pump, an analysing system and a chassis enabling the mobile use on site and at different measuring points.

The PAMAS AS3 Autosampler is a fully automated laboratory particle counter for the unattended measurement of up to 600 samples per day.

Laboratory particle counter for liquids with a viscosity of up to 1600 cSt with an external pressure supply and precise flow rate control. The PAMAS SBSS is a particle counting system for batch sampling. The PAMAS SBSS is the standard instrument used as a reference in many testing labs. The instrument may be programmed to measure a sample without the need of an operator, like pre-filling the internal dead volume, degassing the sample with vacuum, pressurising the sample for a number of measurement runs, and relieving pressure at the end. High accuracy and repeatability, fast purging and back flush possibility are the key benefits of the system.

The microscope system PAMAS FastPatch 2 GO has been developed to comply with the standard ISO 4407 as an automated filter membrane particle counting and sizing system. The system is designed to measure the particles trapped on the surface of the filter. The analysis uses advanced image analysis and microscope automation techniques to provide rapid and accurate contamination results of whole or user specified areas of filters.

Particle counter for the remote on-site analysis of fluid samples – pressureless sampling and up to 420 bar system pressure testing. The PAMAS S40 is a portable particle counting system for oil-based liquids like hydraulic and lubricating oil. A wear resistant ceramic piston pump guarantees a constant flow. With a simple-to-use touch screen user interface, operation is easy and intuitive. The system is equipped with an integrated battery for up to three hours operation and a data storage of up to 4000 measurements. The system can be used for batch sampling and online measurements. Additional accessories are available.

Particle counter in the rugged case PAMAS GO for the remote on-site analysis of fluid samples – pressureless sampling and up to 420 bar system pressure testing. The rugged and resistant PAMAS S40 GO portable particle counter is built to meet the demands of the harshest environments and can be used for field analyses and for laboratory measurements. The instrument includes an integrated battery for mains free operation on site. It is small and light enough to fit into an aircraft overhead locker. The rugged case PAMAS GO is water tight and protects the instrument in harsh environments and during transportation.