Parweld products

Advanced Power Technology Pulse MIG Welding Machines from Parweld. Ideal Power Source Units for Professional Welders. Accessories, Parts, Kits and Spares for APT Machines.

Advanced Power Technology + Machine with 230V mains voltage. Professional Multi-Process Pulse Welding Power Source allowing users to undertake MIG, TIG and MMA (Electrode) Welding Processes within a single machine.

Advanced Power Technology + Machine with 400V mains voltage. Professional Multi-Process Pulse Welding Power Source allowing users to undertake MIG, TIG and MMA (Electrode) Welding Processes within a single machine.

Sirocco Everyday Single Stage, 2 Gauge, Acetylene Gas Regulator. Acetylene Regulators have a 25 bar capability with a 1.5 bar maximum outlet pressure. Sirocco Gas Regulators allow for extended service with its robust construction. Reliable and Consistent Delivery can be achieved due to the high-quality valve operation. Sirocco Regulators feature accurate gauges for optimal gas consumption.

Sirocco Everyday Single Stage Argon Gas Preset Regulator. Argon Regulators have a 3 bar maximum outlet pressure. Sirocco Gas Regulators allow for extended service with its robust construction. Reliable and Consistent Delivery can be achieved due to the high-quality valve operation. Sirocco Regulators feature accurate gauges for optimal gas consumption.

Thick basic-covered electrode for depositing tough and wear resisting overlays on structural members subjected to severe wear. It is particularly resistant to high meta-to-metal wear, moderate impact and abrasion. The weld metal has sufficient red hardness up to +600°C. It can be machined only by grinding. Suitable hardfacing applications where wear resistance at higher temperatures is a prime concern, as in hot cut offs, dies for pressure castings, rolls, crushers excavator parts, bucket edges and bucket teeth, drilling bits, coal planes, conveyor screws. Multi-layers deposits will be free of cracks, even without depositing intermediate buffer layers. Only in case of very crack sensitive base metals, a tough buffer layer, made with ESB 40 or EI 307B electrodes, is required. Preferably used with DCEN but possible to use with AC.
possible to use with AC.

Slagless metal powder cored electrode with outstanding welding properties in the short-arc and spray arc range. Weld metal has very high toughness and charpy impact resistance, so it is suitable and reliable to use down to -40?C. Almost spatter-free when welding in the sprayarc range with mixed gas. Good restriking, even with cold wire tip, thus being suitable for robot application. Characteristic features high deposition rate and welding speed, good side wall fusion, finely rippled welds, without undercutting into the base metal, not even on contaminated or corroded metal surfaces. Little formation of silicates on weld surface, so that multi-pass welds can be made without cleaning. Due to its easily controlable weld pool in the short-arc range, FCW 21 is well-suited for root and positional welding and gap bridging.