Peak Universal Business Ltd (PUB) products
PUBLTD - Blown Asphalt
DESCRIPTION OXIDIZED BITUMEN 90/15 IS BASED ON PETROLEUM BITUMEN WHICH IS MADE BY BLOWING VACCUM BOTTOM AS RAW MATERIAL OF BITUMEN OR BITUMEN 60/70 OR BY VERY HOT AIR. RECOMMEND USES BITUMEN 90/15 IS USING AS RAW MATERIAL FOR BITUMEN COAT, ROOFING, INSULATION AND ISOLATION BITUMEN MEMBRANE SHEET. SURFACE PREPARATION SURFACES MUST BE DRY, CLEAN AND FREE OF LOOSE PARTICLES, FORMWORK, CURING PRODUCTS, IRREGULARITIES, SLURRY, ETC. APPLICATION THE OXIDIZED BITUMEN 90/15 SHOULD BE HEATED DOUBLE TEMPRATURE AGAINST THE SOFTENING POINT TO BE ABLE TO HAVE FLOW AND VISCOSITY. commercial@pub-ltd.com 00905354837392
PUBLTD - Oxidized Bitumen
Oxidized Bitumen 90-40 Description: Oxidized Bitumen 90-40 is based on petroleum bitumen which is made by blowing bitumen 60/70 by very hot air.This kind of oxidised asphalt is mostly using in mediterranean forecast specially morocco market. commercial@pub-ltd.com 00905354837392PUBLTD - Usage of Oxidized Bitumen
Usage of Bitumen Oxidized 90/40 Oxidized bitumen 90-40 is using as raw material for bitumen coat, roofing, insulation and isolation bitumen membrane sheet. commercial@pub-ltd.com 00905354837392
PUBLTD - Paraffin Wax
General Description of Semi Refined Paraffin Wax Semi Refined Paraffin Wax is more than 1% oil content. The price of semi refined paraffin wax is lower than fully refined paraffin wax . For candle making and match industry the quality of semi refined paraffin wax is very good . We produce paraffin wax in 5 kg slabs and pack 5 slab in carton or gunny. Categorizing is based on a range of oil content : 1-2% , 1-3% , 3-5% , 5-7% , 7-10%; For example in semi refined paraffin wax , grade 1-3% slabs of paraffin may have 1% , 1.8% , 2% , 2.6%; 3% oil content But the maximum should be 3% not more than that . commercial@pub-ltd.com Whats app: 00905354837392
PUBLTD - Gilsonite Powder
Natural Bitumen Asphalt Grade: Gilsonite Asphalt Grade deposited in Gilane Gharb, Iran have been known since 1940 and it is the only mineral Asphalt Grade deposits area in Iran. The deposits contain 80 to 97 % asphalt content and there is reserved between 200 to 300 million tons of natural Bitumen. It has been used mainly for road construction and maintenance however oil well drilling fluid to prevent lost circulation. commercial@pub-ltd.com Whats app: 00905354837392PUBLTD - Blown Bitumen 75/25
This grade of Bitumen is made by Pure Bitumen aeration, which leads to Bitumen oxidization with hot air. In this procedure, hydrogen atoms get a reaction with oxygen atoms, and the result is hydrocarbons with lower penetration and higher softening point than Pure Bitumen. Penetration Bitumen 60/70 is a raw material for the production of Blown Bitumen 75/25 and many other grades by passing very hot air through the Bitumen 60/70, the oxidation operation begins. commercial@pub-ltd.com 00905354837392PUBLTD - Blown Bitumen 85/25
Blown Bitumen 85/25 (or Oxidized Bitumen R85/25) is used in numerous industries and their applications. It is used in civil works, roofing, facing, flooring, dust-binders, construction, road-making, road sealing and treatment, crack sealing, adhesive, especial paints, pulp paper. Also, it is used in textile production, combined with fuel, rubber, and plastic products, bitumen-based paints and colors, paving and pavements, noise proofing, and coating to prevents metal structures from corrosion, pavements made by Portland cement. Moreover, this category of Bitumen is used in sensitive industries like Oil and Gas, automobile, and cars industry as a coating component and undercarriage, respectively. commercial@pub-ltd.comPUBLTD - Blown Bitumen 85/30
Blown Bitumen R85/30 is in semi-solid and midrange of this classify which has a softening point between 80 to 90 (ASTM D36) and its needle penetration degree is equal to 30 desi-millimeter (ASTM D5). All tests are performed by ASTM international test method. For more information, you can refer to Test Data Sheet (TDS) section. commercial@pub-ltd.com 00905354837392Bitumen and Asphalt
Peak - Bitumen Emulsion
Emulsified Bitumen usually consists of bitumen droplets suspended in water. This dispersion under normal circumstances would not take place, also everyone knows, oil and water don’t mix, but if an emulsifying agent added to water asphalt will remain dispersed. Most emulsions used for surface treatments. That`s enable using lower temperatures (45-70°C). This is much lower than 150-190°C used for hot mix asphalt cements. The lower application temperatures will not damage asphalt and are much safer for field personnel. In bitumen emulsion production, water treated with emulsifying agent and other chemicals. It pumped to colloid mill along with bitumen. The colloid mill breaks bitumen up to tiny droplets. Emulsifying agent migrates to asphalt-water interface and keeps droplets from coalescing. Emulsion then pumped to storage tank.
Bitumen and Asphalt - Cutback Bitumen
Peak - Cutback Bitumen Medium Curing
Cutback Bitumen Medium Curing (MC)30 is dissolved of bitumen in solvents of kerosene. many countries derive kerosene and other volatile petroleum products and add as a cutter or cutback agent to bitumen to reduce (or cutback) the viscosity of the bitumen.