Pingxiang Naike Chemical Packing Co.,Ltd products

Lithium molecular sieve is high-performance lithium exchanged low silica form of the X-type zeolite with exceptional nitrogen capacity to provide optimal performance in the separation of oxygen from the air in medical oxygen concentrators. The molecular sieve material is developed and designed for the production of up to 95% oxygen-rich airstreams in medical oxygen concentrators with air flows up to 10 liters per minute. There are three mechanisms of adsorption separation: steric hindrance effect, kinetic effect, and equilibrium effect.

CaX is an alkali metal aluminosilicate whose crystal is a calcium X-type structure. The molecular sieve can adsorb molecules with a critical diameter of 9A. It is a special molecular sieve for pressure swing adsorption and oxygen production.

Molecular sieves 13X HP oxygen enriching molecular sieve is a new type X molecular sieve for PSA oxygen concertrator. They are widely used as catalysts to remove the nitrogen from oxygen to obtain pure oxygen. which has higher N2 adsorption capacity and better effect in the N2 /O2 separation process. It’s also used as a desiccant agent to absorb the water, moisture, and humidity from liquids, oils and gases.

For the reason of activated alumina’s  large capacity of absorption, large surface area, high strength and thermal stability, it has been widely used as an absorber, desiccant and catalyst carrier in chemical, petrochemical and fertilizer industry.

The Fenske spiral prismatic packing is made of wire and has a shape similar to that of a spring, also known as a triangular spring Packing. Its differences from a spring in that each turn of the winding is not a circle but a triangular, and the triangular between the ring and the ring is offset by a certain angle, so that it is a polygon when viewed from the end face. This spiral packing is more efficient, but has a slightly higher resistance than the annular packing and is widely used in laboratory-scale isotope separation studies.

Propak Cannon ring is a perforated plate chip, the shape is a half-cylindrical ring with many protruded holes. Naike Chemical supplies the finest quality of protruded metal distillation packing with the best-perforated percentage in the world.

Dixon ring was Originally designed by Dr George Olaf Dixon in 1946, it is a large development from Ceramic cross partition ring. Since it was born, Dixon ring was fine handmade, even after the automated process came up, the best quality Dixon ring is still fine handmade. The advantage of Dixon ring is high-efficiency mass transfer and extremely low-pressure drops.

Ceramic Ball /Inert Ceramic Ball has stable chemical features and a low rate of water absorption, resistant to high temperature and high pressure. It is also resistant to the corrosion of acid, alkali and some other organic solvents. They can stand the rapid changes in temperature during the manufacturing process.

Activated Alumina has the advantages of large surface area, many mciro-pores, well disperser, so it has a high affinity for water/impurity and activated catalyst. According to the applications of balls, there are 3 types of Activated Alumina Sorbent, Activated Alumina Desiccant and Activated Alumina Catalyst carrier. Meantime interior composition of the crystal phase was divided into mode Y and X-P.