111 products found

products

  • PPM Manufactured Products

  • PPM - Model 300 - TOC Analyser

    PPM - Model 300 - TOC Analyser

    PROTOC is a fast, reliable and flexible on-line analyser system designed to accurately determine TOC/TC (Total Organic Carbon) concentrations in real time. The TOC analyser comprises a wall mount analyser section typically supplied complete with a controller, providing local display and outputting signals.

  • PPM - Model TL - TOC Analyser

    PPM - Model TL - TOC Analyser

    PROTOC TL is a fast, reliable and flexible on-line analyser system designed to accurately determine trace level TOC/TC concentrations in real time. The analyser comprises a wall mount, analyser section typically supplied complete with a controller providing local display and outputting signals.

  • ProAm - Ammonia Monitor

    ProAm - Ammonia Monitor

    The ProAm Ammonia Monitor is a simple, compact on-line analyser designed currently to accurately determine ammoniacal-nitrogen in real-time. Other parameters which include Nitrate, Chloride and Fluoride may also be configured. The instrument comprises a wall-mount analyser section with an integral sample pump; a controlling processor interfaced by a membrane keyboard and back lit LCD. Electrical connections for power supply and signals are externally...

  • PPM - Model OFD-1 - Oil Film Alarm System

    PPM - Model OFD-1 - Oil Film Alarm System

    The OFD-1 is an oil film alarm system providing in real-time measurement. The no-contact monitoring system comprises a weatherproof sensor and a separate controller with local display which provides telemetry outputs. The oil film detector may be integrated alongside a number of water quality instruments such as pH, conductivity, DO and TOC to identify pollution and prevent release to local water courses.

  • PPM - Terminator Pollution Abatement System

    PPM - Terminator Pollution Abatement System

    Terminator is a simple, compact and innovative solution designed to automate the isolation of site discharges. The system comprises a surface mounted controller connected to an inflatable bladder which is permanently installed within a discharge pipe. It is simple to install, simple to operate and is an effective control measure providing protection against release of pollution.

  • PPM Bespoke - Portable IQ Ammonium System

    PPM Bespoke - Portable IQ Ammonium System

    PPM has engineered a portable IQ Sensor Net system complete with the Ammolytplus sensor for the direct measurement of ammonium where mains power is not available. The system is housed within a robust, waterproof and lockable case that is easily transported using the extendable handle and integral wheels. Space is provided for a separate and removable case containing rechargeable batteries that provide power supply. A spare battery pack allows for...

  • PPM Bespoke  - Trailer Monitoring System

    PPM Bespoke - Trailer Monitoring System

    PPM can engineer, bespoke trailer mounted systems comprising both probe and analyser technologies to suit the intended application. The trailer provides a secure and weather proof enclosure for temporary installation allowing site investigation at problematic sites or collection of data during commissioning of new treatment processes.

  • PPM - GSM Communications System

    PPM - GSM Communications System

    The need to transmit, display and record data is often dependant upon the particular application needs and indeed whether a suitable site Scada system is already installed. Nevertheless, many applications can still benefit from a more proactive approach to data management. Number crunching exercises can often be avoided if devices are properly configured. Additionally, operators can be notified in real-time of detrimental process changes requiring...

Products by HF scientific, Inc.

  • AdvantEDGE - Model RDO Electrode - Optical Dissolved Oxygen

    AdvantEDGE - Model RDO Electrode - Optical Dissolved Oxygen

    The AdvantEDGE Optical Dissolved Oxygen RDO® Electrode uses the latest technology to measure dissolved oxygen (DO) in demanding environments. The AdvantEDGE Series™ Optical Dissolved Oxygen RDO® sensor o­ffers several advantages for monitoring DO in process applications.

  • AquaSelect - Multi-Input Process Analyzer

    AquaSelect - Multi-Input Process Analyzer

    The AquaSelect Multi-Input Process Analyzer is far more than a 4-wire multi-input meter - it is a sophisticated and highly-flexible analysis platform for a wide range of process applications. Because it displays the status of up to four parameters simultaneously, the AquaSelect provides a complete picture of process status on a single instrument. This multi-channel capability reduces both the number of meters required and the time required for...

  • HF Scientific - Model CLX-Ex2 - Residual Oxidant TRO and Chlorine Monitor

    HF Scientific - Model CLX-Ex2 - Residual Oxidant TRO and Chlorine Monitor

    CLX-Ex2 Residual Oxidant TRO and Chlorine Monitor is a rugged, safe, and low maintenance instrument for shipboard ballast water requiring continuous monitoring and control of residual Total Oxidant levels in hazardous atmospheres. User selectable cycle times, 4-20mA and RS-485 with Modbus output that can be used to control feed pumps and a user selectable alarm allow complete manual or automatic control of chlorine dosing.

  • HF Scientific - Model CLX-XT2 - Extended Reagent Life Online TRO and Chlorine Monitor

    HF Scientific - Model CLX-XT2 - Extended Reagent Life Online TRO and Chlorine Monitor

    The CLX-XT2 Extended Reagent Life Online TRO and Chlorine Monitor is an economical and low-maintenance instrument for shipboard ballast water, potable water, or wastewater applications that require continuous monitoring and control of total chlorine or total residual oxidant (TRO) levels. This marine-grade monitor allows for up to 90 days of unattended operation. The CLX-XT2 offers complete control of dosing & monitoring ballast water discharge...

  • MicroTOL - Online Turbidimeter for Turbidity Testing

    MicroTOL - Online Turbidimeter for Turbidity Testing

    35 years of optical measurement expertise has allowed HF scientific to become a leader in regulatory reporting turbidimeters. The HF scientific MicroTOL Online Turbidimeter has been specifically designed to meet regulations of the EPA and ISO 7027. Features include fast and easy calibration, verification in seconds, low maintenance, fail safe design which ensures your instrument is always reading accurately, bubble rejection system, automatic...

Products by J.U.M. Engineering GmbH

  • Aerosol Can Leak Detector

    J.U.M.'s fast leak analyzer technology is exclusively used in Bautz Engineering's Family of Micro Leak Detectors for filled aerosol cans. Our sensing technology drastically improves the current water bath system for detecting leaks faster and more accurately on aerosol filling lines during the manufacturing process. Our leak detectors are in full compliance with all current EU and UN regulations. They lead to significant gains in the production efficiency and improve health and safety and gr

  • AeroFid - Model 60 - Automatic Micro Leak Detector for Filled Aerosol Cans

    AeroFid - Model 60 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-60 tests up to 80 cans per minute. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. The cans freely scroll through sensing area. Immediately after a leak was...

  • AeroFid - Model 100 - Automatic Micro Leak Detector for Filled Aerosol Cans

    AeroFid - Model 100 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-100 tests up to 120 cans per minute at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. Jam controlled by a star wheel or...

  • AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

    AeroFid - Model 200 - Automatic Micro Leak Detector for Filled Aerosol Cans

    The AeroFid-200 tests up to 250 cans per minute also at a footprint of less than 1 sqare meter. This compact, over the conveyor machine houses the high speed leak analyzer, the control panel with touch screen display and the zero air generator. Our long standing, fast responding Model 22B hydrocarbon propellant sensor automatically extracts one sample at a time from the head and valve area of each individual aerosol can. Jam controlled by a feed worm,...

  • Heated FID Analyzers

  • Heated FID Analyzers - Standard FIDs

    All heated FID THC and NMHC analyzers described in here are equipped with our proprietary sample filter which is housed inside of the heated oven at 190°C. The filter cartridge has a 2 micron filter rating. Changing the filter cartridge is very simple and no special tools are required.

  • J.U.M. - Model 603 - Total Hydrocarbon Analyzer

    J.U.M. - Model 603 - Total Hydrocarbon Analyzer

    The HFID Model 603 is a competitively priced, digitally controlled self extracting, heated total hydrocarbon analyzer for high accuracy, sensitivity and long term stability. It can be used in a 19' rack or as a table top instrument.

  • J.U.M. - Model 3-500 - High Temperature Total Hydrocarbon Analyzer

    J.U.M. - Model 3-500 - High Temperature Total Hydrocarbon Analyzer

    The J.U.M Heated Total Hydrocarbon Analyzer Model 3-500 FID is our lowest cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The 3-500 is based on our time proven 300A FID...

  • J.U.M. - Model 3-600 - High Temperature Total Hydrocarbon Analyzer

    J.U.M. - Model 3-600 - High Temperature Total Hydrocarbon Analyzer

    The J.U.M Heated Total Hydrocarbon Analyzer Model 3-600 FID is another low cost alternative to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons. The 3-500 is built on our time proven 300A FID platform of...

  • J.U.M. - Model 3-700 - High Temperature Total Hydrocarbon Analyzer

    J.U.M. - Model 3-700 - High Temperature Total Hydrocarbon Analyzer

    The J.U.M Heated Total Hydrocarbon Analyzer Model 3-700 FID is designed to be installed directly upstream of a FTIR analyzer (e.g. Gasmet) to continuously measure the total concentration of hydrocarbons within a gaseous sample. All controls which allow to calibrate the FTIR or FID individually are built in. Sources can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal...

  • J.U.M. - Model W600 - Wall Mount All Heated Total Hydrocarbon Analyzer

    J.U.M. - Model W600 - Wall Mount All Heated Total Hydrocarbon Analyzer

    The J.U.M W600 Heated Total Hydrocarbon Analyzer is a very compact wall or panel mount heated FID analyzer to continuously measure the total concentration of hydrocarbons within a gaseous sample. This can be ambient air, exhaust gases from a combustion process e.g. stack emissions, from any type of an industrial vent, from an internal combustion engine, or from any other emission containing hydrocarbons.

  • Heated FID Analyzers - FIDs with Backpurge Filter

    All heated FID THC and NMHC analyzers described in here are equipped with our permanent internal 2 micron stainless sample filter. For cleaning and regenerating this filter compressed air or nitrogen must be supplied applied for cleaning and regeneration. Cleaning typically takes just a few seconds. Our proprietary back purge feature not only cleans the internal sample filter; When a sample line is attached between the sampling probe and the analyzer, this line is automatically cleaned too w

  • J.U.M. - Model VE7 - High Temperature Total Hydrocarbon Analyzer

    J.U.M. - Model VE7 - High Temperature Total Hydrocarbon Analyzer

    The J.U.M. Engineering HFID Model VE7 is a time proven and a very reliable and rugged 19' rack mount heated total hydrocarbon analyzer for low drift, high accuracy, sensitivity and stability. The Model VE7 uses a hydrogen flame ionization detector (FID) in a heated oven to prevent the loss of high molecular weight hydrocarbons and to provide reliable performance in the analysis of high concentrations down to trace levels of THC-contaminants in high...

  • Heated FID Analyzers - Speciality Heated FID`s

  • J.U.M. - Model H100 - Trace Hydrocarbon in Hydrogen FID-Analyzer

    J.U.M. - Model H100 - Trace Hydrocarbon in Hydrogen FID-Analyzer

    The J.U.M. Engineering HFID Model H100 is a compact 19' rack mount or table top heated FID analyzer for the measurement of low trace total hydrocarbon concentration in Hydrogen. High accuracy, high sensitivity and good stability are reached with the FID housed in a heated oven.

  • Heated FID Analyzers - Sampling Accessories

  • J.U.M. - Model TJ 100 - Heated Sample Line

    J.U.M. - Model TJ 100 - Heated Sample Line

    The model TJ 100 is a Heated Sample Line especially designed for Emissions Applications where hydrocarbons are to be measured. To prevent the forming of hydrocarbon memory effects, (hang up), the end caps are heat resistant to up to 200°C. This allows the sample line to be coupled inside an oven of a heated sample filter and heated FID analyzers.

  • J.U.M. - Model 2812D - Compact Sample Pump

    J.U.M. - Model 2812D - Compact Sample Pump

    The J.U.M. Engineering 2812D is a very compact sample pump. The 2812D is made of 316 Stainless Steel to withstand normal corrosive gasses as they are present in standard stack gas emission. The drive mechanism is designed for a very smooth, low vibration, silent and continuous operation .

  • J.U.M. - Model 2825PD - Compact Compressor or Sample Pump

    J.U.M. - Model 2825PD - Compact Compressor or Sample Pump

    The J.U.M. Engineering 2825PD is a very compact compressor or sample pump. The 2825PD is made of 316 Stainless Steel with aluminum heads as a compressor or it is made from all stainless steel to be used as a dual or high flow sample pump. In the all stainless version it withstands normal corrosive gasses as they are present in standard stack gas emission. The pump drive mechanism has been designed for a smooth and low vibration, silent and long...

  • J.U.M. - Model 2812D-HT - Compact, High Temperature Sample Pump

    J.U.M. - Model 2812D-HT - Compact, High Temperature Sample Pump

    The 2812D-HT is a very compact, High Temperature Sample Pump. All parts which come in contact with sample are made of 316 stainless steel to withstand corrosive gasses as they can become present in standard stack gas emission. The drive mechanism has been designed for a very smooth, low vibration, continuous and silent operation. The pump heads withstand operating temperatures of up to 200 deg. C. This pump has been designed to be used in heated ovens...

Products by WTW - a xylem brand

Products by DKK-TOA Corporation Europe

  • Laboratory & Portable Analytical Instruments

  • Model P30 Series - Hand Held Portable Water Quality Meters

    Model P30 Series - Hand Held Portable Water Quality Meters

    Discover DKK-TOA's innovative P30 Series. This complete range of water quality meters combine ease of use, ruggedness and flexibility with laboratory levels of performance and reliability. These instruments contain many innovative features that are simply not available with other more conventional instruments. This has been made possible because each sensor stores its own calibration settings and the meters are able to recognise each individual...

  • Model TB-31 - Portable Turbidity Meter

    Model TB-31 - Portable Turbidity Meter

    The TB-31 Portable turbidity meter is a field operated instrument for measuring turbidity and temperature in a wide range of water environments such as rivers, lakes, dams, water supply areas used for agriculture, waste water and sea water. The unit is capable of measuring turbidity at depths of up to 100 meters. The LCD display shows all appropriate parameters and the instrument features an easy to follow calibration procedures.

  • Water Quality Instruments

  • Model DO-32a - Low Level DO Meter

    Model DO-32a - Low Level DO Meter

    The Model DO-32a low density Dissolved Oxygen meter is battery operated. It incorporates a galvanic cell for water quality monitoring of rivers and lakes. It is also well suited for Dissolved Oxygen management in BOD waste water treatment tanks, culture ponds or other marine environments. The unit provides pressure and salinity compensation together with temperature compensation and offers truly reliable data. The Model DO-32a is easy to use...

  • Air Quality Instruments

  • Model GLN-314E - Nitrogen Oxide Analyser

    Model GLN-314E - Nitrogen Oxide Analyser

    US EPA approved. Microprocessor controller. Touch Sreen User Interface. Independent ranges for NO2, NO & NOx. Optional auto-zero function. Auto ranging. Telemetry outputs. Internal data logger. Measurement and diagnostic data stored on removable memory cards (Compact Flash type). Self diagnostics with warnings / alarms.

  • Model GUX-313E - Ozone Analyser

    Model GUX-313E - Ozone Analyser

    US EPA approved. Microprocessor controller. Touch Sreen User Interface. Temperature & Pressure Compensation. Dual Cell for improved stability and response time. Auto zero function. Telemetry outputs. Internal data logger. Measurement and diagnostic data stored on removable memory cards (Compact Flash type). Self diagnostics with warnings / alarms.

  • Model GFS-312E SO2 - Sulphur Dioxide Analyser

    Model GFS-312E SO2 - Sulphur Dioxide Analyser

    US EPA approved. Microprocessor controller. Touch Sreen User Interface. Long life pulsed Xe flash lamp. Nafion air dryer for sample gas. Auto ranging. Telemetry outputs. Internal data logger. Measurement and diagnostic data stored on removable memory cards (Compact Flash type). Self diagnostics with warnings / alarms.

  • Model GFC-311E - CO Analyser

    Model GFC-311E - CO Analyser

    Features US EPA approved. Touch Sreen User Interface. Microprocessor controller. Gas Filter Correlation Method. Excellent stability of measurement. Auto recovery in the event of power failure. Telemetry outputs. Internal data logger with Compact Flash memory card storage (same card as used in digital cameras etc.). Self diagnostics with warnings / alarms. Optional network interface.

  • Oil Refineries Analysers

  • Model SCA-200, SCA-400 - Sulfur Analyzer

    Model SCA-200, SCA-400 - Sulfur Analyzer

    The Model SCA series are ED-XRF based online sulfur analyzers specially designed for installation in hazardous locations. They are suitable for oil samples such as diesel, heavy oil VGO etc.. The analyzer is explosion protected in compliance with TIIS Ex pd IIB T4. The measurement system is based around a high performance semiconductor X-ray sensor Si(PIN) photodiode. This sensor provides a high S/N ratio together with excellent stability. The X-ray...

Products by WESS GLOBAL, INC.

  • Sludge Monitoring

  • Model ENV-100 Series - Ultrasonic Sludge Blanket Monitoring System

    Model ENV-100 Series - Ultrasonic Sludge Blanket Monitoring System

    The ENV100 Ultrasonic Sludge Blanket Level Meter manufactured by WESS, utilizes enhanced ultrasonic technology to measure the sludge interface level in various types of clarifiers, settling tanks and thickeners with superior accuracy and reliability. The instrument continuously provides the user with important information which includes numeric & graphic screens representing the distance to the blanket, an echo profile image to ensure correct...

  • Model ENV-100 Series - Ultrasonic Portable Sludge Level Meter

    Model ENV-100 Series - Ultrasonic Portable Sludge Level Meter

    The ENV100-P Ultrasonic Portable Sludge Blanket Level Meter manufactured by WESS, utilizes enhanced ultrasonic technology to measure the sludge interface level in various types of clarifiers, settling tanks and thickeners with superior accuracy and reliability. The portable meter is designed to offer economic operation where dozens of clarifiers exist. User can suits the meter to their specific requirement and field conditions with respective internal...

  • Model ENV200 Series - Ultrasonic Sludge Density Monitoring System

    Model ENV200 Series - Ultrasonic Sludge Density Monitoring System

    The ENV-200 is an ultrasonic instrument that measures the density of suspended solid in liquid. It comprises of sensors, a controller, and a junction box. ENV200 with PCM(Process Condition Monitoring) algorithm measures not only the size of received signal, which is often measured by conventional ultrasonic density meters but also observes changes in sound velocity and temperatures in the process. As it monitors operational status and water status in...

  • Model ENV200 Series - Clamp-on Ultrasonic Density Meter

    Model ENV200 Series - Clamp-on Ultrasonic Density Meter

    The Clamp-on type density meter doesn’t need by-pass line or spool-piece(pipe section) when maintenance or replacement is required. As the clamp-on sensor can be mounted outside of pipe line even under flow-running condition, the user neither need to stop their process nor to consider the corrosiveness of liquid.

  • Flow Monitoring

  • Model KFD-Series - Microwave Flow Sensor

    Model KFD-Series - Microwave Flow Sensor

    KFD-Series' is a non-contact flow sensor which emits the microwaves of 24GHz from the tip of its sensor. Reflected from the surface of powders and solids traveling in a pipeline, the microwaves get modulated in their frequency on the Doppler effect principle. The sensor, detecting the frequency difference between transmitted and reflected microwaves, transforms it and amplifies to output contact signals. It can reliably detect a...

  • Model FLO200 Series - Ultrasonic Open Channel Flow Meter

    Model FLO200 Series - Ultrasonic Open Channel Flow Meter

    WESS FLO200 ultrasonic open channel flow meter utilizes enhanced ultrasonic technology to measure a wide variety of open channels with superior accuracy and reliability. The instrument continuously provides the user with important information which includes numeric & graphic screens representing the flow rate, total flow, level, an echo profile image to ensure correct configuration during field commissioning. FLO200 can apply to most flumes and...

  • Level Monitoring

  • Model LEV100 Series - Ultrasonic Level Monitoring System

    Model LEV100 Series - Ultrasonic Level Monitoring System

    WESS LEV-100 ultrasonic level meter utilizes enhanced ultrasonic technology to measure liquid or solid level in various applications with superior accuracy and reliability. The instrument continuously provides the user with important information which includes numeric & graphic screens representing the distance to medium level, an echo profile image to ensure correct configuration during commissioning and saved data analysis. LEV100 series offer...

  • Water Quality

  • Model WA400 - Water Quality Analyzer

    Model WA400 - Water Quality Analyzer

    The WA400 MLSS/SS meter provides various ranges of measurement, 0~20,000 mg/l, 0~10mg/l, 0~100mg/l, and 0~1,000mg/l. The sensors, based on light absorption / scattering technology, clean their surfaces with wiper, water-jet, air-jet, and / or ultrasonic vibration method. The WA400 offer various self-diagnosis function, outputs, and alarm to monitor field condition with user oriented menu options. It also offer 4 beam sensors to guarantee more stable...

  • Model WA500 - Turbidity Meter

    Model WA500 - Turbidity Meter

    The WA500 turbidity meter provides stable measurement without noise interruption. The measurement principle based on the absorption of scattered light is unaffected by the existence of color in sampling. In addition, mechanical cleaner ensures free from sensor contamination and makes the analyzer most reliable in turbidity measurement of sample in water treatment system.

Products by Real Tech Inc.

  • UV254/UVT Instruments

    Real Tech designs and manufactures an industry leading line of affordable and accurate UV254 and UVT instruments.

  • Real Tech - Model M Series UV254 - Wastewater Online Analyzer

    Real Tech - Model M Series UV254 - Wastewater Online Analyzer

    Real Tech’s UV254 Online analyzers offer an affordable and accurate solution for real-time UV254 or UVT monitoring. Benefiting from Split-Sense Pro and patented Ortho-beam technology, the need for calibration is limited lowering maintenance requirements. Several path length options provide solutions for wastewater to high purity applications.

  • Real Tech - Model M1500 - UV254 Wastewater Probe Analyzer

    Real Tech - Model M1500 - UV254 Wastewater Probe Analyzer

    The UV254 Probe analyzer was designed with wastewater applications in mind. The robust design and innovative Ortho-Beam technology provide accurate and stable readings in the most complex environments. The custom zero feature lowers maintenance, allowing the instrument to be calibrated without removing the probe from the channel. Combined with the automatic compressed air cleaning system, the system surpasses the competition in performance and ease of...

  • Real Tech - Model P Series - UV254 Organics Testing Portable Meter

    Real Tech - Model P Series - UV254 Organics Testing Portable Meter

    The UV254 Portable meters from Real Tech lead the way in portable organics testing. Benefiting from Spilt-Sense technology, the instruments have a unique memory calibration feature which allows the meters to be used for an extended period of time before DI calibration is required. Operation is straight forward with accurate and repeatable results obtained in seconds. An optional Battery Pack allows for sampling anywhere, anytime.

  • Sensors

    Real Tech manufactures a comprehensive optical sensor line that includes single wavelength to full scanning sensors to meet any client's needs.

  • Real Tech - Multiparameter Sensor

    Real Tech - Multiparameter Sensor

    Monitoring multiple parameters, such as organics and nitrates, with a single sensor is practical and affordable using Real Tech’s Spectrum sensors. Using multiple wavelength or full scanning analysis, each parameter is monitored using a unique calibration. Additional wavelengths are monitored and used for each calibration to compensate for background inference and overlap, ensuring accurate and precise measurements are obtained for each...