PRM Filtration products

Banded Top Bag Filter Housings for remediation and industrial filtration needs. Units come standard in 304 stainless steel with Viton O-Rings. Standard Model uses 2mm Stainless Steel and Premium Model uses 3mm Stainless Steel

Liquid filter bags made of polyester felt to offer you quality and efficiency in each bag. Polyester Felt bag materials offer high dirt holding capacity at a low cost. Polypropylene Ring with Handles are standard on our bags at no additional cost.

.5" X 20" SPUN POLYPROPYLENE SEDIMENT FILTER CARTRIDGE

BFHBFH2SLDORX: Top O-Ring (Viton) for #2 Flat Plate Bolt Top High Pressure Housing (For use with Carbon Steel Housing BFHBFH2CSX and Stainless Steel Housings BFHBFH2 and BFHBFH2NPTX). BFHBFSMALLVITONORING: Small Diameter O-Ring (Viton) for #2 Housing (fits under strainer basket).

Temp (continuous): min -26° F ( -15° C) max 220° F (104° C).

This foam gasket material is used to seal between air stripper trays and the lid. Use this gasket material in conjunction with PRM air stripper gasket grease for an air tight seal. PRM recommends replacing air stripper gaskets at least annually under normal conditions, or more frequently in harsh site conditions.

Remediation of contaminated water streams. Designed to operate at low pressures without sacrificing efficiency.

Modern oil water separators require coalescing media to attain high performance requirements. The oil removal concept is through the collision of the oil droplet with the media surface or "adsorption" where gravity separation becomes a lesser element of oil removal in coalescing designs.

The PRM EFM-DN series meters are flow totalizing meters that can be used to provide rate flow and totalized flow of various liquids such as water, polymers, surfactants and other chemicals. These meters are non-invasive electromagnetic meters designed for harsh applications and long life with excellent accuracy. Unlike paddlewheel, vortex or other mechanical meters, there are no moving parts through the entire measuring chamber and accuracy is increased while maintenance requirements are decreased. The entire flow chamber consists of a PTFE liner to ensure absolute chemical compatibility with most all known chemicals.

PRM 2.5 Inch Pressure Gauge 304 Stainless Steel case, Brass 1/4" NPT Back (0-30" WC/PSI).