Refine by
Companies Equipment & Supplies
114 equipment items found
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1/4”Ø Galvanized shaft extension, includes paddle ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster air pads are a cost-effective solution to many material flow problems. They are ideal for finely ground dry materials that tend to pack while in storage and then cling to the walls of the bin. Multiple air pads are installed intermittently along the bin wall and low pressure air is directed along the bin walls to ensure a continuous, even flow of material out of the bin. At just ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BinMaster’s VRX41 vibrating probe level sensor with pipe extension has been revamped with a bright, built-in LED status indicator to make monitoring levels and plugged chutes easier than ever. The light can easily be seen from afar, appearing as red or green, and changing color based on if material is or is not covering the probe and damping its ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Extended rotary protects against overfilling. Vertical extensions are used for top-mounted BMRX rotaries to get high-level alerts. Custom extensions are available up to 144”. Top-mounted, vertically oriented extensions measure further down into the bin to prevent overfilling or protect valuable continuous level sensors at the top of the bin. Consult with a BinMaster ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
VR-21-X - Vibrating probe level sensor, 20 to 250V AC/DC, 7.37” insertion length, process temp to 176°F (80°C), triple thread screw-off cover, dual conduit entries, DPDT relay contacts, selectable fail-safe protection, FDA recognized powder coat finish, LED status indicator light; CSA C/US listed for Class ll, Groups E, F, & ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The BinMaster PRO AUTO-CAL 230 Power Pac delivers simple, reliable point-level detection with the convenience of automatic calibration. Operating on 230 VAC, it uses a magnetic trigger so setup and testing can be completed in minutes without removing the cover. Designed for precision, it offers sensitivity down to 0.5 pF and an adjustable time delay of up to 10 seconds to virtually eliminate ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The CNCR-230 compact 80 GHz non-contact radar with window display is for distances up to 49 ft (15 M). It installs using a 1.5” threaded NPT or 1.5” threaded straight NPT connection. The enclosure is rated IP66/IP67, Type 4X to protect from dust and water damage. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The DPM-300 large display Modbus scanner is the biggest and brightest display for the toughest manufacturing environments. It features a dual-line six-character display from its NEMA 4x, IP65 rated enclosure. Its super-luminous readout is UV resistant and sunlight readable up to 100 feet away. The two lines are user configurable to show either multiple variables or custom tags used to identify ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
With a built-in 4-20 mA output and integrated keypad, the SmartBob AO level sensor automatically transmits data to a PLC each time it takes a ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
6” x 1-1/4” Diameter Galvanized shaft ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BM-T Strain relief. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. The BinMaster BMRX-200 rotary level indicator is used in solids and powders to prevent overfills, dry runs, or process shutdowns. It has an onboard PCB and DPDT relays that allow users to set up two switching outputs, such as one to a covered and the ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
The DPM-300 large display Modbus scanner is the biggest and brightest display for the toughest manufacturing environments. It features a dual-line six-character display from its NEMA 4x, IP65 rated enclosure. Its super-luminous readout is UV resistant and sunlight readable up to 100 feet away. The two lines are user configurable to show either multiple variables or custom tags used to identify ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
3D Level Scanner - S with extended temperature up to 365°F with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 30º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with internal LCD display and 3DVision software. Hazardous location approved, FM listed for ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BM-T Switch ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
FD2000 - Microwave flow / no flow monitor with ATEX approvals in IP 64 enclosure, 24 VDC, certified for Class II Groups E, F, & G. Flow Detect 2000 is a flow sensor to detect dry solids flow in any processing ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
Want more information about what rotary options to order? Get more information in the Rotary Configuration Guide and Rotary Paddle Selection Guide. BinMaster’s BMRX-300 rotary level switch is the first to feature a highly-visible, built-in LED indicator light. Easily seen from a distance, the bright LED changes from green to red when the paddle stops turning when the bin is full or empty. ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
IECEx/ATEX certified 3DLevelScanner-S with 7.67” diameter horn, 20-32 VDC, 4-20 mA output, Modbus, and RS-485 communications. Determines the average volume of stored materials based on a 30º beam angle in silos up to 14’ diameter and 200’ tall. Unit comes with an internal LCD display and 3DVision software. Hazardous location approved for European Union and global ...
Premium
Manufactured by:BinMaster Sensors and Technologies LLC based inLincoln, NEBRASKA (USA)
BM-T Roll ...