Pt. Geotechnical Systemindo products

PET WOVEN GEOTEXTILE entwined in the longitudinal direction (warp) of polyester and in a transverse direction (weft) from polyamide or polyester. The use of high-modulus multifilament polyester yarn and a special patented process of matting (warp straight). PET WOVEN GEOTEXTILE it serves to reinforce the structure of the soil. In addition, it can be used to make the slope of a steep slope, thus reducing the land area. PET WOVEN GEOTEXTILE made in 10 strong tensile strength with versions reaching 1000 kN/m, a higher strength or customize can be produced on demand.

ASPHALT REINFORCEMENT are made of high modulus polyester and coated with bitumen to achieve good bonding with the asphalt. One side has a nonwoven ultra-lightweight, also coated with bitumen. This simplifies installation and the non woven ensure continuous bonding between layers. Strong ties allows ASPHALT REINFORCEMENT tensile strength to accept and distribute it evenly across large areas. Therefore, ASPHALT REINFORCEMENT is an effective method to prevent cracking in the asphalt layer.

EROSION CONTROL MAT has a function as a protective slope erosion and anchoring. Made from 3 dimensional polyester for an instant and permanent protection for slope surface erosion, as well as coated with polymers to protect them from the influence of UV. EROSION CONTROL MAT serves to protect the topsoil from erosion caused by surface water, mainly in areas that have a highly rainfall. EROSION CONTROL MAT also protect the soil surface that has slips, parallel to the slope. The ground slipping happens on a heap of path between the topsoil with a mound of compacted core.

EROSION CONTROL MAT has a function as a protective slope erosion and anchoring. Made from 3 dimensional polyester for an instant and permanent protection for slope surface erosion, as well as coated with polymers to protect them from the influence of UV. EROSION CONTROL MAT serves to protect the topsoil from erosion caused by surface water, mainly in areas that have a highly rainfall. EROSION CONTROL MAT also protect the soil surface that has slips, parallel to the slope. The ground slipping happens on a heap of path between the topsoil with a mound of compacted core.

PET BI-AXIAL GEOGRID is a sheet of Polyester(PET), in the shape of a square, which functions as a reinforcement for the soft soil layer. PET BI-AXIAL GEOGRID characteristic that stands out is the its excellent mechanics under temporary high pressure conditions. The strength of the PET BI-AXIAL GEOGRID is the same in both directions (parallel and transverse). When the small grained stone material  compacts into the cracks of the PET BI-AXIAL GEOGRID, a locking effect can be achieved. This grid strength can tolerate loads at low tension, which in turn becomes an economical solution for highway design. the small grained material is reduced by about 40%, this material will not lose its technical ability.