Pumpability Pty Limited
10 products found

Pumpability Pty Limited products

Progressing Cavity Pumps

Progressing Cavity Pumps

New series with special patented joints for much reduced overall length. Hand-holes included as standard. Integrated base feet adapt to many kinds of support surfaces. Nominal flows up to 90 m3/h. Pressures up to 24 bar. Body in robust cast iron construction. Rotors in tempered or standard AISI420 stainless steel. Stators in NBR or Viton. Single mechanical seal

Peristaltic Pumps

Floating stator construction is a little more forgiving in abrasive applications or dry-running. Suction at the front of the pump, discharge at the motor end, vertically up or to either side. Hand-holes included as standard. Integrated base feet adapt to many kinds of support surfaces. Nominal flows up to 2.5 m3/h. Pressures up to 10 bar. Body in robust cast iron construction. Rotors in chromed or standard AISI420 stainless steel. Stators in NBR or Viton. Single mechanical seal

Peristaltic Pumps

Peristaltic Pump

Hose bore diameter 12–55 m. Cast iron construction. Minimum flow rate 84 L/h. Maximum flow rate 20,000 L/h. Maximum pressure 15 bar. Self-priming to 9 mwc. Speeds 5 – 133 rpm. Reversible flow. Vertical or horizontal connection orientation

Peristaltic Pumps

Hose bore diameter 65 – 100 mm. Cast iron construction. Minimum flow rate 3,100 L/h. Maximum flow rate 65,200 L/h. Maximum pressure 15 bar. Self-priming to 9 mwc. Speeds 5 – 79 rpm. Reversible flow

Mixers and Dosing/Depositing Systems

Dostam - Static Mixers

Dostam mixers are tubes containing helical links mounted with alternate left and right hand bends. The splitting and rotation of the flow induces uniform mixing with continuous flow rates.

Dosymix Dynamic - Mixers

Low-shear mixing by simultaneous forward and counter current mixing.

Lobe Pumps

Lobe Pump

Cast iron body. Polyurethane or nitrile lobes. Maximum flow rate 525 m3/h. Maximum pressure 10 bar. Maximum temperature in continuous service 90 °C. Viscosities up to 1,000,000 cP. Particle size up to 90 mm. Reversible flow. Air gap between pump head and gearbox. Reversible front cover for double service life. Mechanical seals - front-loading cartridge seals for easy replacement. Splined shafts

Self-Priming Pumps and Auto-Prime Pumps

Wet-prime - Self Priming Pumps

Monobloc self-priming pumps for clean or dirty water, electric drive.

Self Priming Pumps

Pedestal self-priming pumps for clean or dirty water, diesel or electric drive.

Wellpoint Dewatering

Piston Pumps

Double-acting piston pumps for wellpoint dewatering. Simple and reliable pumps of high efficiency.