QSP Packers, LLC products

A typical grouting job uses either Inflatable or Mechanical Packers. The selection is determined based on the condition of the borehole, the depth of the hole and what support equipment is readily available.

The Wireline System is a timesaving method for conducting permeability testing during core drilling.

The Environmental Packer is a Fixed-End Style Packer manufactured using either Neoprene, EPDM or Viton® rubber gland element and Type 304 or Type 316 stainless steel. It is designed for applications such as Groundwater Monitoring, Methane gas control or collection (typical in landfills and mines), Vacuum sampling at or below Leachate pads, Formation pressure monitoring, and Vados zone sampling and injection.

QSP designs all of their Packers modularly and the majority of packers are purchased for use as a Single Packer. Monitoring equipment such as Pressure Transducers, Thermistors, Conductivity Probes, pH Probes, or injections ports are common uses with perforated pipe for injection testing. Testing equipment can include Bladder Pumps, Electric or Piston Pumps for pump out testing at various depths and with the ability to isolate various zones.

All Packer replacement parts can be purchased separately, ie. Center Tubes. Fixed Heads. Sliding Heads. Glands.

Mechanical Packers sometimes called Surface Set Packers, are a low cost, low pressure, hand set Packer for Cased Wells, or Smooth Hard Rock Bored Holes. They are made to be set at 12” depth to 20’ depth. The length is decided by where seal is going to be down hole. They have a limited expansion range, that is why they are not recommended to be used in Open Holes.