Raptor Tank Cleaning Systems products

The Bristol M-7 Cleaner uses a high-pressure stream of water, slurry or other solvent to automatically clean tanks, reservoirs, or similar difficult to reach areas. On command from the program control, the nozzle directs a concentrated jet stream in a pre-set pattern to cut, dissolve and flush deposits out of the tank discharge or drain port. It handles up to 250 gallons per minute at pressures up to 250 p.s.i., removing gypsum, clay, calcium carbonate, acid crystal, or similar precipitates without disturbing the tank or its lining. In addition, the M-7 Cleaner can help you recover valuable acids, fats, oils or other materials left in tanks. Empty weights of transport cars can be reduced, saving on return charges.

The TC-N1 Tank Cleaning System efficiently removes deposits from highway trailers or rail tank cars using the proven jet-cleaning technique employed by other Bristol tank cleaning systems. The TCN1 features a sealed hatch mounting design that contains fumes or spray as the single jet-stream cuts hazardous deposits from the bottoms of trailers or rail cars. The system handles up to 250 gpm of wash solvent at pressures up to 250 psi to flush deposits out of the tank bottom drain. Slurries with heavy solids concentrations and corrosive liquids can be used for effective washing because the 1 ½ inch stainless piping is completely separate from the nozzle positioning actuators.