Republic Manufacturing products

Republic Centrifugal Blowers are designed for both pressure and vacuum applications. As a preferred alternative to compressed air, centrifugal blowers provide clean, dry, oil-free air at lower operating costs. The best-in-class RBX-Series attains 80% peak efficiencies, further reducing operating costs, and offers up to 8 times longer bearing life than standard blowers.

Republic Centrifugal Blowers are designed for both pressure and vacuum applications. As a preferred alternative to compressed air, centrifugal blowers provide clean, dry, oil-free air at lower operating costs. The best-in-class RBX-Series attains 80% peak efficiencies, further reducing operating costs, and offers up to 8 times longer bearing life than standard blowers.

The Republic HRC025 is a three phase, high pressure regenerative blower with a maximum air flow of 36 cfm, maximum vacuum of 44 in.H₂O, and maximum pressure of 41 in.H₂O.

The Republic HRC025-1 is a single phase, high pressure regenerative blower with a maximum air flow of 36 cfm, maximum vacuum of 44 in.H₂O, and maximum pressure of 41 in.H₂O.

The Republic HRC100 is a three phase, high pressure regenerative blower with a maximum air flow of 58 cfm, maximum vacuum of 60 in.H₂O, and maximum pressure of 64 in.H₂O.

Republic Tube Axial Blowers are designed for use in low to medium pressure-ducted applications. These blowers may be mounted either vertically or horizontally. They are generally used for removal of contaminated air or hot air found in industrial applications; but can be used to supply air through ductwork for cooling or pressurizing interior spaces. The low maintenance, oil-free design provides continuous, dependable service.

Republic Dry-Running Rotary Vane Pumps are single stage, dry-cooled and direct driven for continuous operation. The VRT, DVT and DRT smaller pumps (408-440) come with integral motor, while the larger pumps (3060-3250) are available with or without motor. The dry vane compressor can reach up to 21.8 psig, and the dry vane pump can pull a maximum of 25.5” HgV.

Republic Oil Lubricated Rotary Vane Pumps are single stage, dry-cooled and direct driven for continuous operation. The RX series of oil lubricated rotary vane vacuum pumps is one of the most reliable and simplest vacuum pumps available. These rugged pumps are simple to install and easy to service and maintain. They are available with or without motor to meet your application needs. These vacuum pumps have a displacement range from 11 to 445 cfm (18 to 756 m³/hr) and maximum vacuum of 0.5 torr.

The Republic RCV-60 dry-running 2.0 hp rotary claw vacuum pump has capacities of 62 m³/hr for 50 Hz and 44 cfm for 60 Hz. Republic Rotary Claw Pumps are dry-running positive displacement claw vacuum pumps ideally suited for oil-free applications. They are single stage, air-cooled, and direct driven for continuous operation. The design is one of the most reliable and efficient vacuum pumps available. The pumps utilize high-precision machined claws that rotate in synchronization without contact to generate vacuum without wear. These rugged pumps are simple to install and require minimal service and maintenance.

Standard Inlet Aluminum Air Knife 2" inlet x 2". Standard and custom-made air knives are available in extruded aluminum, in 2" and 3". Dual inlet air knives, and accessories are available for your custom pressure and air stream needs. Republic air knives are manufactured in-house, guaranteeing a high level of quality assurance. Republic accessories are made to allow for optimal performance.