Rimeco AS products

Old thick steel scrap, predominantly more than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. May include tubes and hollow sections. Excludes vehicle body scrap and wheels from light vehicles. Must be free af rebars and merchant bars, free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. Refer to points B) and C) of the general conditions.

Old thin steel scrap predominantly less than 6 mm thick in sizes not exceeding 1.5 x 0.5 x 0.5 m, prepared in a manner to ensure direct charging. If greater density is required, it is recommended that maximum 1 meter is specified.

There must be no heavy steel parts Ike spindles for lathe, heavy construction steel, forks etc. as they can cause damage to equipment. Splinters, incinerators and tires are not allowed. Frag feed usually consist of municipal iron, radiators, roof tiles, frames, tanks (blank), hoods, cages, cars (environmentally treated), white goods, etc. 3% impurities can be accepted - but not steriles, industrial waste, soil, household waste, tyres, plastic etc.

MINIMUM thickness 6 mm. MAXIMUM size 1,5 x 0,5 x 0,5 m. Steriles are not accepted. Thick new production steel scrap predominantly more than 6mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of rebars and merchant bars even from new production. Must be free of metallic copper, tin. lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. Refer to points B> and C) of the general conditions.

No thickness requirementMAXIMUM size for the steelmill 1,5 x 0,5 x 0,5 m. Steriles are not accepted. Thin new production steel scrap predominantly less than 3mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of unboundribbons to avoid trouble when charging. Must be free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. Refer to points B) and C) of the general conditions.

MINIMUM thickness 3mm for items & 8mm for pipes MAXIMUM sizes 1,5 x 0,5 x 0,5 m (sales). Combustion engines are not allowed, the items must be free of grease, oil, bearings, rent houses, linings and the like, which in the worst case can cause explosions, thicknesses should preferably be above 25 mm to ensure low phosphorus content (sales). MAXIMUM piece weight 1 ton.

Iron chips may NOT contain plates, slag, grinding dust, gravure, moisture and similar materials The iron shavings must appear as a homogeneous product, dry (free of cutting agents), without visible impurities. Cast iron and steel chips shall be delivered in separate lots. No blending allowed.

MAXIMUM thickness 3 mm MAXIMUM size 1,5x0,5x0,5m Steriles are not accepted. Thin new production steel scrap predominantly less than 3 mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of unbound ribbons to avoid trouble when charging. Must be free of metallic copper, tin, lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. Refer to points B) and O of the general conditions.

Manganese scrap, preferably not more than 0,5 tons per. single part Items must be free from rubber, grease and oil. May contain wear parts such as chains, bells, shovels, hamsters and the like from heavy industry, iron scarves, hardened teeth from excavators.

MINIMUM thickness 6 mm MAXIMUM size 0,4xO,4xO,4m. Thick new production steel scrap predominantly more than 6mm thick prepared in a manner to ensure direct charging. The steel scrap must be uncoated unless permitted by joint agreement and be free of rebars and merchant bars even from new production. Must be free of metallic copper, tin. lead (and alloys), mechanical pieces and steriles to meet the aimed analytical contents. Refer to points B) and C) of the general conditions. Oversize will not be accepted at all.