Rising Steel Industries products

A pipe is a tubular structure that allows for a swift movement of media in the system. A Stainless Steel Welded Pipe is produced as a long ribbon or sheet is rolled and subsequently welded following standard fabrication processes. These pipes can be manufactured in the straight and spiral welded specifications. The SS Welded Pipe can be formed in large sizes without any size restriction. These pipes are commonly seen in the transportation of water and oil in large quantities. The SS Welded Pipes can transport moderate pressure and temperature media due to the presence of seams on the pipes. The welds may be susceptible to corrosion but are very reliable on the long run.

A stainless 304 grade steel is an austenitic grade that can be severely deep drawn. The Stainless Steel 304 Pipe is a common grade that is produced with a chemical content of chromium, nickel, and other constituting alloys. These pipes work well in temperatures above 800 degrees F and possess good corrosion resistance properties. A SS 304 Pipe works well in organic and inorganic chemicals in oxidizing environments. These pipes are tolerant to intergranular corrosion and can be readily welded in place.

The SS 304L is an austenitic low-carbon stainless steel grade. A 304L Stainless Steel Pipe is produced with a chemical content of 18% chromium and 8% nickel. These pipes are resistant to carbon precipitation and have enhanced corrosion resistance properties. The Stainless Steel 304L Pipe works well in harsh conditions and in high and cryogenic temperatures. The non-magnetic grade can be easily annealed and can be readily cold worked.

A SS 310 pipe is part of a medium carbon austenitic stainless steel grade. The Stainless Steel 310 Pipe is designed with an outstanding chemical composition of chromium, nickel, carbon, manganese, phosphorous, sulfur, silicon, and iron. The pipes are developed for use in higher temperature and corrosion-induced applications.

The SS 310s is an austenitic heat-resistant alloy grade. A Stainless Steel 310S Pipe is designed with a superior chemical composition of nickel and chromium with other constituting alloys. These pipes possess good oxidation properties under mild cyclic temperatures up to 2000 degrees F.

The ASTM A790 UNS S31803 is a high alloy duplex stainless steel grade. A790 UNS S31803 Pipe is designed with a dual-microstructure of austenitic and ferritic. These pipes are produced with a chemical content of chromium, nickel, and molybdenum with other constituting alloys. The ASTM A790 UNS S31803 Pipe is a nitrogen enhanced grade and are designed to combat corrosion problems that are common in the 300 series. The grade of pipes are very common in the duplex stainless steel family.

A super duplex pipe is made with an austenitic and ferritic microstructure. The Super Duplex Pipe is designed with a superior chemical composition of chromium, nickel, molybdenum, and other constituting alloys. These pipes have exceptional strength and showcase good corrosion resistance. Super Duplex Tubing has enhanced tolerance to chloride stress corrosion cracking and has excellent resistance to pitting and crevice corrosion. These tubes are recommended in applications up to 600 degrees F. A Super Duplex Pipe Manufacturer supplies pipes that are suited for desalination equipment, chemical processes, marine applications, oil and gas industries, etc. The Super Duplex Tube Suppliers have a wide inventory of products of different sizes. These tubes have a density of 7.8 g/cm3 and possess a melting point of 1350 degrees C.

The ASTM A790 UNS S32750 grade is a variation of the super duplex steel. The ASTM A790 UNS S32750 Pipe is designed with an austenitic and ferritic microstructure. These pipes showcase excellent chemical properties with chromium, nickel, and molybdenum as their primary constituents. They possess good corrosion resistance properties and work well in temperatures up to 600 degrees F. ASTM A790 Super Duplex S32750 Seamless Pipe has a melting point of 1350 degrees C and has a hardness of 310 max HRB. These pipes have an ultimate tensile strength of 116ksi with a minimum yield strength of 80ksi.

A carbon steel pipe is an iron-carbon alloy with higher content of carbon. The Carbon Steel Pipe has minimum alloying elements; however, they contain manganese, silicon, and copper content. These pipes have moderate corrosion resistance properties across harsh environments. A CS Pipe has good strength and is slightly difficult to machine due to its higher hardness.

The ASTM A53 gr B is a commonly used material for different steel pipes. ASTM A53 Gr B Pipe is designed with a chemical composition of carbon, copper, manganese, sulfur, phosphorous,nickel, molybdenum, chromium, and vanadium. These pipes have good resistance to corrosive affluents and reducing media.