RLE Technologies

12 products found

Products

  • Liquid & Water Leak Detection Equipment

  • Conductive Fluid Sensing Cable

    Conductive Fluid Sensing Cable

    RLE’s orange sensing cable (SC) reliably detects the presence of water leaks and other conductive fluids. It’s one of our hallmark products, and RLE Technologies has held the patent for this particular cable since 2000.

  • Chemical Sensing Cable

    Chemical Sensing Cable

    RLE’s green chemical sensing cable is used to reliably detect leaks via the presence of acids, bases, and other conductive liquids. A relatively new addition to our product line, RLE has held a patent on this particular cable since 2012. It affords users with all the same benefits as our orange conductive fluid sensing cable, plus:

  • Model LD5200 - Distance-Read Controllers

    Model LD5200 - Distance-Read Controllers

    Protecting a facility from damaging leaks is an important part of any disaster mitigation plan.  The  LD5200 pairs superior leak detection technology with an easy-to-use interface.  This integration helps users quickly and efficiently establish a distance-read leak detection system that reliably protects valuable assets.

  • Model LD2100 - Distance Read Leak Detection Controller Monitors

    Model LD2100 - Distance Read Leak Detection Controller Monitors

    The SeaHawk LD2100 distance-read leak detection controller monitors up to 5,000 feet (1,524 meters) of sensing cable.  Robust and web-accessible, it is compatible with all SeaHawk sensing cables and the SD-Z spot detector.Designed to monitor large facilities and complex leak detection networks, the LD2100 can be configured as a Modbus master in systems with multiple RLE leak detection controllers.  It can easily integrate into existing...

  • Model LD1500 - Distance Read Leak Detection Controller Monitors

    Model LD1500 - Distance Read Leak Detection Controller Monitors

    The SeaHawk LD1500 distance-read leak detection controller monitors up to 1500 feet (457 meters) of sensing cable.  This web-accessible controller is designed for simple integration into existing monitoring systems, and is compatible with all SeaHawk sensing cables and the SeaHawk SD-Z spot detector.This controller is ideal for areas where sensing cable may not be visible.  The LD1500 is most commonly installed in data centers (under raised...

  • Facility Monitoring Products

  • Facilities Monitoring System (FMS)

    Facilities Monitoring System (FMS)

    RLE’s FMS Facilities Monitoring System is a comprehensive monitoring system commonly used to monitor sensitive facilities, critical equipment status and temperature, and environmental sensors. Feature-rich and budget friendly, the FMS is currently used in data centers, labs, telecommunications facilities, museums, and many other facilities around the world.Looking for maximum versatility and expandability, all in a reliable, easily-accessible,...

  • System Integration Products

  • Protocol Converter

    Protocol Converter

    The Protocol Converter connects directly to equipment and converts SNMP, BACnet, and Modbus protocols to one or more of these same protocols for integration into a building management system (BMS) or network management system (NMS).

  • LDRA - Model 6  - Alarm Signaling System

    LDRA - Model 6 - Alarm Signaling System

    The LDRA6 accommodates six inputs that can be configured for zone water detection or as remote alarm annunciators.  An LDRA6 can monitor for both leaks & alarms generated by networked equipment.As a zone leak detection solution, the LDRA6 is compatible with SeaHawk sensing cables and SeaHawk SD-Z & SD-Z1 spot detectors.  This allows the LDRA6 to detect the presence of water, conductive fluids, and chemicals.  When a leak is...

  • Model RA1x2 - Alarm Annunciator System

    Model RA1x2 - Alarm Annunciator System

    The RA1x2 is a relay splitter and alarm annunciator. It splits a single dry contact relay input into two electrically isolated outputs and annunciates the change in state of any dry contact relay signal.Designed to be simple to use and easy to maintain, the RA1x2’s dual relay outputs activate when an alarm is detected. If the monitored dry contact changes state, the alarm LED illuminates and the audible alarm sounds.

  • Relay Replicators System

    Relay Replicators System

    Digital outputs are designed to be wired to one remote system, but users often require the signal to be sent to multiple systems – but wiring a single output to two remote panels can cause damage to the remote panels’ components.RLE’s Relay Replicators split a single digital dry contact input into two electrically isolated digital outputs, so the same signal can be sent to multiple remote panels.  This allows digital alarm...

  • SeaHawk - Model LD1000 - Single Zone Leak and Water Detection Controller Monitors

    SeaHawk - Model LD1000 - Single Zone Leak and Water Detection Controller Monitors

    The SeaHawk LD1000 single zone leak and water detection controller monitors up to 1,000 feet (305 meters) of sensing cable.  It is compatible with all SeaHawk sensing cables and SeaHawk SD-Z and SD-Z1 spot detectors. As a stand-alone leak detection controller, the LD1000 features an audible alarm and three LED indicators.  It is ideal for small areas, facilities where the sensing cable or spot detector is exposed or leaks can be easily...