Romind T & G products

Insulating gloves are personal protective equipment frequently used by electricians as auxiliary protective equipment against electrical shocks, in all types of low and high voltage power installations. They represent a barrier against the passage of electric current between the live conductor and the earth, by means of the human body. Besides their insulating properties, insulating gloves also have other protective characteristics against substances or agents that may affect the human body, classified as follows with regard to their protective category:

Insulating gloves are personal protective equipment frequently used by electricians as auxiliary protective equipment against electrical shocks, in all types of low and high voltage power installations. They represent a barrier against the passage of electric current between the live conductor and the earth, by means of the human body.

The work area fencing system is a mobile equipment intended to separate and enclose the work area, in order to warn upon the existence of this working area and to prevent the free access of unauthorised persons in this area. It can be used in any circumstance that requires the separation of the working area (electrical stations and lines, streets, etc.)

Insulating sleeves are protective equipment used during works on LV electrical panels (Un ≤ 1 kV). Insulating sleeves are recommended for the electrical insulation of live sockets and High Rupturing Capacity (HRC) fuses in electrical panels, in order to avoid the accidental contact with the installation in the proximity of the work area. Insulating sleeves are made of red-tinted transparent polycarbonate, which provides appropriate elasticity combined with mechanical resilience and excellent dielectric rigidity. Their constructive shape allows fixing in any of the HRC fuse sockets size 0, 1, 2, 3.

The insulating end caps are protective devices suitable for works in LV installations (Un ≤1 kV), for temporary coverage of bare ends of electrical conductors, in order to avoid accidental contact in case of live works or to avoid the occurrence of short-circuits between phases or earthing. Manufactured from an insulating and flexible material, given their profile, each model of insulating end caps allows the application and fixing on the conductors ends, with various diameters, 5 sizes of insulating end caps that can be applied on electrical conductors with sections between 105 and 240 mm².

Modular insulating sticks (PMU or PMP) consist of one or more elements (modules) that can be connected to obtain a complete equipment.

Application: from the ground, by hanging the phase clamp on the round section conductor, followed by the tightening of the clamp driving screw. Classic / automatic phase clamps must be handled using an insulating stick according to the voltage of the installation, provided with “RO bayonet’’ coupling system.

The modular ladder is used for ascent/descent and work at height on wooden or concrete poles (with round or rectangular section). The modular ladder can be used by a single person, only in the vertical position, fastened to the pole.