Rosemount Analytical Inc - Emerson Process Management
Refine by
Families
22 products found
Rosemount Analytical Inc - Emerson Process Management products
Model 404 ENDURANCE Conductivity Sensors
Fast, Easy Start-up. Rosemount Analytical products are designed for fast, easy, and trouble free start-up. Endurance sensors are provided with an accurate predetermined factory calibration constant, removing the need for troublesome calibrations with unstable conductivity standards. Simply zero the sensor in the air and enter the Cal constant into the instrument. This feature is available only when used with Rosemount Analytical Models 81C, 3081C, 1054B DC, 1054B LC, and 1054B R.Model DO System for Determination
The Model DO-03/04 is a complete system for the determination of dissolved oxygen in wastewater aeration basins. It consists of a sensor, an analyzer, a handrail mounting assembly, a sensor washer head, and an air compressor. A timer in the analyzer allows the user to customize the air blast cleaning cycle.Model 330B Flow Through ORP Sensor
The Rosemount Analytical Model 320B pH Sensor measures the pH of a flowing aqueous fluid. Typical applications include pH monitoring or control in boiler feed water, process water, chemical processes, municipal water treatment, and many other applications. The Model 330B measures oxidation reduction potential (ORP), and has applications in chromate waste treatment, bleaching operations, chemical processes and municipal water treatment. Depending on the application, the sensor may be installed directly in the process line or in a by-pass line.Model 370 pH Sensor
The Model 370 is a simple combination pH sensor with a ceramic diaphragma and glass construction. It is available in a wide variety of lengths and features a single pole connection plug to retrofit industry standard PG 13.5 installations.Free Residual Chlorine Sensor
The Rosemount Analytical Model 450 Free Residual Chlorine Sensor, used with the Model 1054B Free Residual Chlorine Analyzer and the Model 1181 free residual chlorine transmitter, measures the free residual chlorine level in a wide variety of applications, such as Potable water treatment, sewage plant effluent, cooling tower chlorination control, swimming pools, and industrial waste treatment plant effluent.
Model 1055 Solu Comp II Dual Input
The Solu Comp II analyzers offer the choice of single or dual sensor input with measurement choices of pH/ORP, resistivity/conductivity/TDS, % concentration, ratio conductivity, total and free chlorine, dissolved oxygen, dissolved ozone, flow and temperature. Dual measurement analyzers offer a wide choice of measurement combinations thus reducing the cost per loop and needed panel spaceModel 499ACL Chlorine Sensor
The 499ACL-01 is intended for the continuous determination of free chlorine (hypochlorous acid plus hypochlorite ion) in water. The primary application is measuring chlorine levels in drinking water. It can also be used to monitor dechlorination processes. The sensor requires no acid pretreatment and can measure free chlorine in samples having pH as high as 9.5. The linear range of the sensor is 0 to 10 ppm. For determination of higher levels of chlorine, consult the factory.Total Chlorine Analyzer
The Model TCL is intended for the determination of total chlorine in water, including the determination of chlorine in seawater. The system consists of a sample conditioning unit, a sensor, and either a 1055-24 or a 54eA chlorine analyzer.