RSBP spol. s r. o. products

The RSBP membrane is the perfect economical solution for protection against damage and loss in production caused by the explosion. Under normal operating conditions, the venting opening on the technological equipment is covered by the explosion venting panel. When the operating pressure level increases inside the device, the venting panel opens, and thus the pressure and flame are released from the protected space. The technology is exposed to a lower pressure than its pressure resistance and hence won`t be destroyed. Effective dust explosion venting, including light metal dust, gas, and hybrid mixtures. Explosion venting device VENT PRO is certified according to EN 14797 standard.

The FLEX flameless explosion venting device is a suitable solution for installation on technological equipment inside buildings or in production halls. Unlike conventional explosion venting, where temperatures up to 1 500 °C can be achieved, the FLEX device can cool the flame and flue gas temperatures to a level that is no longer dangerous for technology and the people around the equipment. FLEX meets the strictest requirements of the legislation for flameless venting and is certified according to EN 16009.

The HRD barrier is an active system that prevents the transmission of an explosion. It releases the extinguishing agent extremely fast into the pipeline and thus stops the increase in pressure.

The surface treatment is usually done by automatic painting systems, such technology is endangered by high probability of fire or explosion. This danger is present in spray booths for the application of organic liquid and powder coating materials.

Cooling oil mist, flammable liquid vapors, or combustible waste generated during the machining process, in combination with an initiation source, can lead to the violent ignition of flammable mixtures. The ensuing fire will cause devastating damage to the machine equipment. FIREPRO automatic fire extinguishing system is the efficient protection against devastating consequences by suppressing the fire in its initial stage.

Polluted environments caused by the adhesion of fine dust to the filter elements together with high airflow create the ideal environment for a fire. Even a small ignition source in the form of a spark is enough for its formation. Subsequent fire and damage caused by it often require not only the replacement of filter elements but also other technological parts of the filter. Such damages have a significant impact on the entire production process.

In the process industry, we often come across many machines that work with flammable substances. The risk of fire cannot be ruled out in any of these technologies. The FIREPRO automatic fire extinguishing system is a suitable solution for the protection of technological units, such as mixing machines, dryers, mills, or crushers. The FIREPRO system for fire protection of machinery complies with standard EN ISO 19353.

The FIREPRO automatic fire extinguishing system is a possible solution for the protection of these technologies. The FIREPRO system work is based on monitoring the protected area with highly sensitive optical detectors that capture specific fire parameters. If a fire is detected, the detector sends a signal in milliseconds to the control panel, which immediately starts extinguishing. The extinguishing agent in the form of water mist is evenly distributed to the protected space through special nozzles designed specifically for the given type of extinguishing.