Sanko Stainless Steel products

A Pipe fitting is defined as a part used in a Piping System, for change in direction, change in pipe diameter or branching. There are many different types of fittings and they are the same in all Sizes and Sch as the Pipes. Buttweld Fittings are normally made from Pipes. Buttweld (BW) Fittings whose dimensions, dimensional tolerances etc are as per ASME B16.9 STD, Light-weight corrosion fittings are made as per MSS SP43.

A Pipe fitting is defined as a part used in a Piping System, for change in direction, change in pipe diameter or branching. There are many different types of fittings and they are the same in all Sizes and Sch as the Pipes. Forged Fittings are normally made from round bar as it name only suggest that it is been forged.

A flanges is a poduct which is use to connect pipes, valves, pumps and other equipment to form a piping system. Flanges are usually welded or screwed type for connecting. Flanges joints are made by bolting together 2 flanges with a gasket between them to provide a seal and prevent from any leakage. Flanges facing are of different types like Raised face, flat face, Ring-Type Joint, Tongue & Groove, etc.

Outlets fittings or Branch Connection Fittings (also known as O`lets) are fittings which provide an outlet from large pipe to a smaller or same size. The main pipe onto which the connection is welded is usually called the RUN or HEADER SIZE. The pipe to which the Connection provides a Channel is usually called the Branch or Outlet Size. Branch connections are ilike SOCKET WELDING, THREADING & BUTTWELDING ENDS. MSS-SP-97 Standard Practice covers essential dimensions, finish, tolerances, testing, marking, material and minimum strength requirements for 90 and 45 degree integrally reinforced forged branch outlets fittings of buttwelding, socket welding and threaded types.

Dimension Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43. Size : Seamless 1/2" to 24" ,  Welded 1/2" to 24". Two Joint / Two Halve Fittings 6" to 48". Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS.

Stainless Steel 310 / 310S Forged Fittings; Standards : Designation. ASTM : A 182. ASME : SA 182.

A flanges is a poduct which is use to connect pipes, valves, pumps and other quipment to form a piping system. Flanges are usually welded or screwed type for connecting. Flanges joints are made by bolting together 2 flanges with a gasket between them to provide a seal and prevent from any leakage. Flanges facing are of different types like Raised face, flat face, Ring-Type Joint, Tongue & Groove, etc.

Dimension Standard : ASME/ANSI B16.9, ASME B16.28, MSS-SP-43. Size : Seamless 1/2" to 24" ,  Welded 1/2" to 24". Two Joint / Two Halve Fittings 6" to 48". Thickness : Sch 5s, Sch 10s, Sch 40s, Sch 80s, Sch 160s, Sch XXS,.

A Pipe fitting is defined as a part used in a Piping System, for change in direction, change in pipe diameter or branching. There are many different types of fittings and they are the same in all Sizes and Sch as the Pipes. Forged Fittings are normally made from round bar as it name only suggest that it is been forged.