SCI CORPORATION CO., LTD. products
SCI - Double Flanged Eccentric Butterfly Valves
Butterfly valves provide a unique combination of simplicity, durability and reliability. They are low cost, easy to install, ideally suited for open/shut services. It is also suitable for throttling service. The application cover a various range of liquids and gases, including water, natural gas, oils (animal , vegetable and mineral) , dilute acid etc.
SCI - Swing Check Valve
Swing Check Valve are manufactured and tested in accodance with BS 5153 PN 10/16/25, BS EN 12334, TIS.383 PN 6/10/16,MSS-SP 71 class 125/250 and also meet the requirements of AWWA C 508, generally recommended to prevent backflow with minimum resistance tor flow, because of full water way design. Suitable for all types of water ,air and steam.
SCI - Gate Valve Non Rising Stem
Gate Valve Non Rising Stem are manufactured and tested in accordance with BS 5150 PN10/16/25, BS EN 1171:2002, BS EN 1074-2, TIS 432 PN 6 / 10 / 16 and also meet the requirements of MSS-SP-70 class 125 / 250, Suitable for all types of water, air and steam.
SCI - Air Valve
SCI AIR VALVES have been especially designed to allow the most efficient method of releasing or admitting air during the filling and emptying pipelines or vessels and the release of air accumulating in pipeline during normal working conditions.
SCI - Knife Gate Valves
Knife Gate Valves are manufactured and tested in accordance with MSS-SP-81 class 125 / 150. The knife gate valves are bonnetless, available for both non-rising and rising stem design, with cast solid body, follower and yoke. Metal seated and resilient seated knife gate valve are available. Valves are resilient seating (com- pression sealing) with the wire reinforced rubber seat which located below the bore and out of the flow line (full bore), shall be capable of tight shut-off in both direction (bi-directional) and simple in-line seat replacement. Lock nut or stopper on the stem prevents the gate from being over tightened and the o-ring is provided between the layers of packings to sweep the sludge from the gate. The full flow and Bi-directional flow ensure SCI knife gate valves with highest efficiency and reliability.