Sealtec Construction Company Ltd. products

For use on the dry side. Permanently protects the concrete surface. Resistant to UV radiation. High resistance of the surface to oils and greases. The film formed impedes the growth of algae and moss. Protects against many types of contamination.

Cementitious sulphate resistant waterproofing slurry against ground water and backwater, also under negative pressure. On concrete and masonry, in the structural, civil and hydraulic engineering sectors, interior and exterior, for new and old buildings. Auxiliary material in accordance with DIN 18533. Technical approval for structural waterproofing. AQUAFIN-1K can be brush applied, trowelled or sprayed with suitable equipment.

2 component, flexible, cementitious mineral-based waterproofing slurry against ground, seepage (fluctuating) and backwater. For new and existing buildings in the building and civil engineering sector, for interior and exterior use as well as beneath tiles. Also for use in channels, manholes and swimming pools. Structural waterproofing in accordance with DIN 18533. Suitable as a bonded waterproof membrane for water penetration classes W0-I to W3-I without chemical impact to DIN 18534 part 3; in external areas on balconies, loggia etc. to DIN 18531 part 5 and for waterproofing containers and tanks for water penetration class W2-B to DIN 18535. Tested for water impermeability to DIN 4030 against water aggressive to concrete up to XA2 level of attack. Resistant to de-icing salts. Very low emissions - GEV EMICODE EC1 Plus R.

Thermoplastic expanding jointing band for waterproofing construction joints. Elastic application. Rapid and intense swelling. Completely dimensionally stable even at high temperatures. Swelling process inexhaustible and often reversible. Suitable for fresh water and salt water. Suitable for riparian zones. Certified general technical approval. Thickness: 5 mm, width: 20 mm.

Retrospective horizontal waterproof barrier against capillary rising damp in masonry work.  Ready to use hydrophobic waterproofing agent with deep protection through retrospective capillary contraction. Up to 95% moisture saturation when applied under pressure. Can be applied with either low pressure or without pressure. Conforms to the requirements of the WTA guidelines. (International Association for Science and Technology of Building Maintenance and Monuments Preservation.)

Crystalline waterproofing slurry; Cementitious, capillary active waterproofing slurry for the secure waterproofing of concrete substrates also against negative water pressure. External and internal waterproofing in cellars, lift pits, foundations, pile foundations, floor slabs etc. Waterproofing of containers for potable and service water, retaining tanks, water treatment plants and similar. Waterproofing beneath screeds (unbonded or floating screeds). Approved for potable water structures according to DVGW W270, W347.

1 component PU-injection resin for sealing water-bearing cracks. Ready to use, foams quickly with high volume increase offering high resistance.

2 component elastic PU-injection resin. Slow reaction time, hardening to a viscoelastic pore-free material. Advantageous application by means of suitable injection pumps. Officially approved as a system with AQUAFIN-CJ1 (injection tube).

Rapid cementitious waterproofing; Hydraulic, self-cross-linking setting, Bitumen-free, Rapid, reactive drying.

For an efficient application in construction waterproofing and as a bonding membrane beneath tiles. Suitable as a bonded waterproof membrane for water penetration classes W0-I to W3-I without chemical impact to DIN 18534 part 3; in external areas on balconies, loggia etc. to DIN 18531 part 5 and for waterproofing containers and tanks for water penetration class W2-B to DIN 18535.