SERVINOX

9 products found

Products

  • Dosing

  • Model VDD - Double Flow Dosing Valve

    Model VDD - Double Flow Dosing Valve

    The operating principle of the VDD valve is based on a triple position actuator moving a conical plug. The first position enables the valve to be fully opened, thereby minimizing pressure drop. The second position allows intermediate opening for reduced product flow. A micrometric screw located on the top of the actuator enables the precise adjustment of the intermediate flow rate between 0 and 100 % of the nominal diameter. The third position closes...

  • Sampling

  • Model PEMS III - Tank Leveling Sample Valve

    Model PEMS III - Tank Leveling Sample Valve

    The PEMS iII sampling valve is used to take a liquid sample from a tank for quality and/or bacteriology controls. Its hygienic “flush membrane” hygienic design (flared body) guarantees the absence of retention zones (favourable to bacterial growth) with clear and/or relatively non-viscous liquids, as well as excellent cleanability. Its hygienic qualities and simplicity of installation and maintenance make it a market benchmark.

  • Model PEMS V - Syringe Taking Sample Valve

    Model PEMS V - Syringe Taking Sample Valve

    The PEMS V sample valve allows to take product directly into a tank or a process line, using a needle. This allows to keep a complete sealing between internal and external atmosphere.

  • Model PEA - Sample Valve

    Model PEA - Sample Valve

    The sample valve PEA type give the ability to take samples of viscous or cherged producrs inside a tank.

  • Safety Equipment

  • Model SHP - PED Hygienic Pressure Safety Valve

    Model SHP - PED Hygienic Pressure Safety Valve

    SHP safety valves are available in ND 8, 13, 20, 32 and 40, supplied with micro-clamp, mini-clamp or clamp depending on diameter. This equipment it totally autonomous, requiring no external control for its operation. Pressure calibration is with a stainless steel spring and pressure blowoff is collected. Calibration must be between +0.5 bars and +6 bars; connections are with clamps. In the standard version, the valves are designed to operate at a...