Simex s.r.l.

Simex s.r.l.

9 products found

Products

  • Self-Levelling Planers

  • Model PL 25.10 - Self-Levelling Planers

    Model PL 25.10 - Self-Levelling Planers

    Designed for removing the entire layer of asphalt or cement in preparation for trenching or for milling deteriorated sections for later resurfacing. Designed to mill pre-defined sections on hard and compact surfaces such as asphalt and cement. SIMEX PL self-levelling Planers give the possibility to reuse milled material to back fill the trench.

  • Wheel Saws

  • Model T 300 - Wheel Saws

    Model T 300 - Wheel Saws

    Designed for fixed-section trenching on hard and compact surfaces, including asphalt, cement and rock. The total protection of the saw at any working depth ensures maximum safety of persons and property. Hydraulic piston motors in direct drive with milling disk allow maximum hydraulic efficiency and a high cutting force.

  • Cutter Heads

  • Model TF 200 - Double Drum Rotary Cutter Heads

    Model TF 200 - Double Drum Rotary Cutter Heads

    Simex TF cutter heads are ideal for trenching, profiling and resurfacing rock and cement walls, quarrying, demolitions, dredging and finishing operations. They are highly effective where conventional excavation systems are too weak and percussion systems have little effect. As they do not produce strong vibrations or high noise levels, they can be put to work near schools, hospitals, infrastructure and sensitive areas.

  • Planers for Excavator

  • Model PLB 200 - Planers for Excavator

    Model PLB 200 - Planers for Excavator

    Designed for removing the entire layer of asphalt or cement in preparation for trenching or for milling deteriorated sections for later resurfacing. Designed to mill pre-set sections on hard and compact surfaces such as asphalt and cement. SIMEX PLB planers for excavator allow the possibility to reuse milled material for backfilling trenches. They are very effective for milling or cutting  any surface,...

  • Crusher Buckets for Excavator

  • Model CBE 10 - Crusher Buckets for Excavator

    Model CBE 10 - Crusher Buckets for Excavator

    Designed to reduce the volume of aggregates directly on site.  The rotor system is ideal for crushing reinforced concrete and demolition waste and is not affected by the presence of iron, rock, earth, deformable parts or wet or humid material. Lightweight structure won't transmit vibrations to the prime mover or the operator. Low noise output. Wide mouth, shaped as standard bucket for easy loading.

  • Vibrating Compactors - CT

  • Model CT 2.8 BASE - Vibrating Compactors

    Model CT 2.8 BASE - Vibrating Compactors

    Ideal for mounting on skid steer loaders as well as backhoes and other loaders (with or without hydrostatic drive). Guarantees a firm, even and extremely compact bed that assures long-term durability and maximum road safety. Works with wheel in central position and prime mover running alongside the trench. Reverse rotation vibrating twin shaft located in the center of the wheel to: add up the vertical forces for maximum compacting power; counter...

  • Planers for Asphalt and Cement - PL

  • Model PL25.10  - Self-Levelling Standard Flow Planer

    Model PL25.10 - Self-Levelling Standard Flow Planer

    Attachment designed for planing small trenches, crossings or scarifying the top layer of asphalt. Ideal for mounting on skid steer loaders not fitted with high flow systems, as well as small hydrostatic drive loaders and backhoes.

  • High Depth Planer - PL

  • Model PL 60.25 - High Depth Planer

    Model PL 60.25 - High Depth Planer

    Width: 600 mm. RH/LH depth: 0 - 250 mm. Transverse Tilt: 16° °. Required oil flow: 90 - 160 l/min. Required oil pressure: 300 - 180 BAR. Operating weight*: 1200 - 1350 Kg.

  • High Depth Planer - PHD

  • Model PHD 450  - High Depth Planer

    Model PHD 450 - High Depth Planer

    Width: 450 mm. RH/LH depth: 0-180 mm. Required oil flow: 90 - 140 l/min. Required oil pressure: 250 - 180 BAR. Operating weight (std. drum): 900 Kg. Recommended Excav. weight*: 10/16 Ton