SK Environmental Ltd products

The Robertshaw Model 5318B Level-Tek is a RF capacitance point (On/Off) level switch, that employs all solid state electronics for detecting predetermined product level changes in tanks, sumps, silos and other vessels or containers. The Model 5318B is capable of detecting a variety of products, including liquids, powders, granular, lump and flake materials. The product can be conductive or non-conductive

The Robertshaw Model 5318B Level-Tek is a RF capacitance point (On/Off) level switch, that employs all solid state electronics for detecting predetermined product level changes in tanks, sumps, silos and other vessels or containers. The Model 5318B is capable of detecting a variety of products, including liquids, powders, granular, lump and flake materials. The product can be conductive or non-conductive.

SK Emission Monitors are designed to measure dust and smoke discharged from Furnaces, Incinerators, Boilers and industrial plant. Satisfying legal requirements to monitor smoke and particulate emissions into the atmosphere.

The Low Pressure Controller / Transmitter provides an accurate and reliable means of measuring and controlling low positive, negative and differential pressure. The model 222 designed to measure pressure conditions within combustion plant can also be used to control air flow for optimum combustion efficiency using the solid state relay output control options (a.c.and d.c.control options available).

The SK flue gas oxygen monitor is designed to provide a reliable and accurate measurement of oxygen within the flue gases from industrial boilers; furnaces and incinerators. The monitoring of oxygen within the flue gas is the most reliable and repeatable means of assessing correct burner operation, combustion efficiency and thereby minimising emissions in the atmosphere. The Model 2016 is a solid state electronic monitor consisting of a flue stack mounted zirconium dioxide sensor and wall mounted indicator control unit.

The SK Model 2950 is a simple to use flue gas analyser (analyzer) utilising sensors mounted directly into the process or flue. The controller gives a direct 4-20mA output and a direct reading so you can instantly see the selected flue gas content on a clear LCD screen and interface to host control systems. The control panel allows the user to set alarm levels for each medium measured. CO2 calculation is also provided for the display of CO2.

The 320 Series is a range of universal digital process indicators, which accept over 20 common industrial inputs. A wide range of options is available enabling the 320 to be used in a variety of applications with 4 software alarms; optional 0-10V, 4-20mA or 0-20mA isolated re-transmission; bridge excitation; and serial digital communications.

SK Environmental supply two types of temperature sensor (Thermocouple & RTD), both built and function in compliance with the highest possible standards.

Dynamometer tests by a major diesel engine manufacturer have proven that SUDDEN LOSS OF COOLANT CAN DESTROY YOUR ENGINE IN 50 SECONDS and it will do so before an overtemperature signal is received. Overtemperature sensors are only capable of sensing excessive coolant temperature caused by clogged radiators, malfunctioning thermostats, failed water pumps, or any other “circulation” problem. Upon loss of coolant, however, these temperature sensors must try to respond to hot air which, being a poor thermal conductor, results in signals that arrive only after the engine is severely damaged.

Replacement Sensors now available for all the following obsolete Cooper Standard and Robertshaw Models.