SLB products

System for coiled tubing drilling, completions or any operation requiring precise pressure control. The PRESSURE & FLUID MANAGEMENT SYSTEM coiled tubing application technology was designed for coiled tubing drilling and completions requiring precise pressure control. The closed-loop technology also provides an innovative solution for the efficient removal of waste and gas from drilling fluids. The technology is ideally suited for frac and flowback operations, workovers, well cleanup, reentry, completions, and unconventional drilling operations requiring a small footprint.

Conventional slop water treatment methods involve shipping waste to shore for treatment and disposal. This process increases exposure to HSE risks and can still cost thousands of dollars per cubic meter of slop. Shipping to shore also requires thorough cleaning of the vessel tanks after offloading, which adds to costs and the overall volume of waste. The ENVIROUNIT offshore slop water treatment system provides a rig-based, compact, and modular solution for treating and recycling slop water. The proprietary four-step treatment process reduces overall waste volume by more than 90% while simplifying logistics and saving considerable time and costs over conventional methods.

Oil-based fluid treatment process enables reuse of expensive fluids; The RHE-USE system enables operators to reuse invert emulsion drilling fluids over multiple wells without relying on reclamation through high rates of dilution. The process treats oil-based drilling fluid, reducing solids below 1% while drilling. Before the introduction of the RHE-USE system, combating the buildup of ultrafine, low-gravity solids required using dual centrifuges and dilution. With the RHE-USE system, staged centrifugation accompanied by chemically enhanced treatment renders both low-gravity solids (LGS) and drill solids manageable. The system can easily be adjusted to produce relatively ‘dry’ cuttings, reducing drilling wastes.

Minimize HSE risks and decrease waste generation; Tanks on rigs and supply vessels must be cleaned as solids build up or fluids are changed to avoid cross-contamination. Until now, tank cleaning has typically involved laborers equipped with hoses, pressure washers, shovels, and squeegees.

Schlumberger companies Cameron and M-I SWACO offer the industry`s only complete original equipment manufacturer (OEM) deepwater MPD system. A key component of this system is the integrated MPD riser joint, comprising the Cameron riser gas handling (RGH) system and the below-tension-ring rotating control device (BTR RCD) from M-I SWACO.

VERSA-CHOKE modular drilling choke technology enables high-end pressure management in a wide range of pressures and temperatures. A modular design enables easy component replacement. The ability to reverse trim significantly improves choke operation life and reduces maintenance costs. The unit has the capacity to easily hot swap the actuator without requiring disassembly of internal components, reducing maintenance time.

Ratings (ASTM A105): 800 p.s.i. @ 850°F, 1440 p.s.i. @ 100°F. Test pressure (ASTM A105): Hydraulic:(minimum): Body - 2180 p.s.i., Seat - 1495 p.s.i. Air under water: Seat - 85 p.s.i. Standards: Construction: BS 5352, Socket weld: ASME B16.11, Threaded: ASME B1.20.1, Test: BS 6755 (Pt.1). Connections (xx): SW: Socket weld, B8: Butt weld 80, TH: Threaded NPT, TS: Sw/NPT, SE: Sw(e)/NPT, SU: Sw(u)/NPT, B4: Butt weld 40.

Ratings (ASTM A105): 800 p.s.i. @ 850°F, 1440 p.s.i. @ 100°F. Test pressure (ASTM A105): Hydraulic:(minimum), Body - 2180 p.s.i. Seat - 1495 p.s.i. Air under water: Seat - 85 p.s.i. Standards: Construction: BS 5352, Socket weld: ASME B16.11, Threaded: ASME B1.20.1, Test: BS 6755 (Pt.1). Connections (xx): SW: Socket weld, B8: Butt weld 80, TH: Threaded NPT, TS: Sw/NPT, SE: Sw(e)/NPT, SU: Sw(u)/NPT, B4: Butt weld 40.

Ratings (ASTM A105): 1500 p.s.i. @ 850°F, 3705 p.s.i. @ 100°F. Test pressure (ASTM A105): Hydraulic:(minimum), Body - 5575 p.s.i. Seat - 4100 p.s.i. Air under water: Seat - 85 p.s.i. Standards: Construction: API 602, Socket weld: ASME B16.11, Threaded: ASME B1.20.1, Butt weld: ASME B16.25, Test: API 598. Connections (xx): SW: Socket weld, B8: Butt weld 80, TH: Threaded NPT, TS: Sw/NPT, SE: Sw(e)/NPT, SU: Sw(u)/NPT, B6: Butt weld 160.

Ratings (ASTM A105): 1500 p.s.i. @ 850°F, 3705 p.s.i. @ 100°F. Test pressure (ASTM A105): Hydraulic:(minimum), Body - 5575 p.s.i. Seat - 4100 p.s.i. Air under water: Seat - 85 p.s.i. Standards: Construction: API 602, Socket weld: ASME B16.11, Threaded: ASME B1.20.1, Butt weld: ASME B16.25, Test: API 598. Connections (xx): SW: Socket weld, B8: Butt weld 80, TH: Threaded NPT, TS: Sw/NPT, SE: Sw(e)/NPT, SU: Sw(u)/NPT, B6: Butt weld 160.