Sodimate, Inc products

The injector screw transfers or injects dry chemicals into a sludge mixer, slurry tank or gas stream while isolating moisture, heat and condensation from the dry chemical. Injector screws are used in place of isolation devices such as pinch valves, slide gates, rotary airlocks, and butterfly valves.

Sodimate’s MBV sludge mixer is designed for the mixing of sludge and lime to achieve Class B stabilized sludge. The dual-shaft compact mixer can easily be adapted to existing or new sludge stabilization processes for water and wastewater treatment plants.

Many high-consumption lime industries use Sodimate quicklime slakers as opposed to using powdered hydrated lime or ready-mixed lime slurry. Our slakers are able to absorb the exothermic reaction of calcium oxide and water, and efficiently separate lime grit from the highly concentrated calcium hydroxide resulting from the slaking operation.

Sodimate supplies a complete pneumatic conveying system to inject powder into your process, from the storage to the fumes duct. The Sodimate Mechanical Arch Breaker discharges and doses the product stored in the silo or Big Bag emptying stands to a Tee to which the blowing device is connected. Then the compressed air conveys the powder to the injection point through a pipe. The pneumatic conveying is done in a dilute phase, allowing us to operate with a low pressure and cost-effective blowing device, e.g. a fan or a regenerative blower.

Our storage hopper is ideal for discharging smaller quantities of product delivered in 50 lb bags, such as lime, soda ash, sand, cement, or powdered activated carbon (PAC). These units feature a ZFP 500 mechanical discharge and feed system.

Sodimate’s big bag discharger units are designed to store 35ft³ and 70ft³ capacity big bags, FIBC bags, bulk bags, or super sacs. The big bag can be placed on the frame using standard handling methods, such as a forklift or overhead crane, or the unit can integrate its own manual or electrical hoist.

The operation is simple, reliable, with a very high accuracy for industrial applications. This installation allows weight dosing from a buffer hopper placed under or near the silo to the injection point. This mechanism can also be applied to the Big Bag emptying stands.

Sodimate’s CS screw conveyors are designed to transport bulk powder material between two points without altering feed accuracy or damaging product particles.