Sun Hydraulics products

This FLeX Series solenoid-operated, 2-stage, balanced relief cartridge is a pressure regulating valve.

Counterbalance valves with pilot assist are meant to control an overrunning load. The check valve allows free flow from the directional valve (port 2) to the load (port 1) while a direct-acting, pilot-assisted relief valve controls flow from port 1 to port 2. Pilot assist at port 3 lowers the effective setting of the relief valve at a rate determined by the pilot ratio.

Body Type ; Line mount. Interface ; None. Body Features ; Inline. Mounting Hole Diameter ; .28 in.. Mounting Hole Depth ; Through. Mounting Hole Quantity ; 1. Open Cavities ; 1. Cavity ; T-162A. Port Size ; 1/4" NPTF. Model Weight ; 0.29 lb.

The Embedded Electronics Amplifier is a compact, low profile coil/controller combination for use with proportional solenoid valves. The Amplifier provides current to the coil in proportion to an input signal. Bright LED indicators on the unit provide an overview of the operating status. Setup is accomplished through Sun's Amplifier Set Up Software or the Hand Held Programmer (HHP). There is no cover to remove and no tiny pots to set. Once configured, the settings are stored in permanent memory within the unit.

The XMD module is an electro-hydraulic driver for use with mobile and industrial hydraulic equipment. It is configurable using Sun's free CANpoint XMD Configuration Software and a CAN-to-USB interface cable connected to a computer or via the XMD Mobile app. The XMD driver can control a variety of electrically operated hydraulic actuators used in applications for on- and off-highway equipment including but not limited to agriculture, forestry, construction, marine, earth moving, and material handling. Tuned for optimal flow and pressure control using Sun valves, the XMD driver delivers repeatable and reliable results for your demanding applications.