Sysmatec products

Air sampler at 100 L/min. The MicroBio MB1 is an invaluable device for validating clean rooms to ISO 14698 requirements.

Air sampler at 100 L/min. Monitoring air quality through the collection of airborne bioaerosol contaminants. The MB2 Air Sampler collects airborne bioaerosol contaminants in both indoor and outdoor environments. Air is aspirated through a removable metal head (cover) which contains a series of 1 mm holes at a rate of 100 liters/min. The laminar air flow that is created by this design impels micro-organisms onto the agar surface of a 55 mm contact plate. After exposure to a fixed volume of air, the contact plate is removed and incubated at the required temperature. When the colonies are visible to the naked eye they are counted. The count, along with the volume of air sampled, is used to calculate the number of micro-organisms per cubic meter of air (CFU per cubic meter).

Laboratory stirrer with rotation speed from 0 to 2000 rpm. It automatically adjusts the speed through microprocessor controlled technology within the speed range of 0/30 – 2000 rpm. Safety circuits installed ensures automatic cut-off in an anti-stall or overload conditions. Continuous comparison of shaft speed to desired speed is maintained and variations are adjusted automatically. This guarantees a constant speed even with changes in viscosities of the sample.

PTFE-jacketed stainless steel shaft, propeller with four blades completely made of PTFE. Clockwise rotation of the shaft produces a vacuum behind the stirrer blades. By this vacuum, the gas is transported from the gas compartment through the hollow shaft and into the product. The rotation speed depends on the fluid level and the immersion depth: e. g. 430 rpm are necessary at 150mm.

Temperature range: -200 ° C to + 250 ° C. Nearly universal chemical resistance.

The Torus Miniature Spectrometer from Ocean Optics is a Visible range (360-825 nm) unit that delivers low stray light (0.015% at 400 nm) and high throughput. Torus delivers scientific-grade performance with outstanding thermal stability, making it a brilliant choice for color measurement of LEDs and absorbance measurements up to 3.0 OD.

The USB4000 is the last-generation flagship spectrometer, with a 3648-element Toshiba linear CCD array for increased signal-to-noise and enhanced electronics for controlling the spectrometer and accessories.

These probes are especially useful for embedding into process streams for in situ, real-time sample monitoring. The are more suitable for liquid solutions. The probe has two fibers projecting light through a shared lens. Light from the source is focused by the lens onto a mirror across the sample gap. The light is reflected back through the lens to the read fiber, which brings the light to the spectrometer. The lenses are focused for use in water, and if used in air, will be severely out of focus and inefficient.

High flash rate, short-arc xenon lamp for the UV (220-750 nm). The PX-2 operates at speeds up to 220 Hz, offers excellent pulse-topulse stability and has two trigger modes for software control of the flash rate.

bluLoop features four tunable LEDs that allow unparalleled balancing of spectral output. It delivers higher reliability of estimated color values, has low heat consumption and has a longer lifetime than typical halogen sources