Taff-Guard Filtration products

The Taff Pleat MERV 7/8 pleated air filter uses a fully synthetic media which is tested in accordance to ASHRAE 52.2 standards. The synthetic polypropylene media is bonded to a metal backing giving it it`s aerodynamic form. The media pack in enclosed and bonded at all points into a heavy duty, moisture resistant, beverage board frame.

The Taff Pleat MERV 10/11/13 pleated air filter uses a fully synthetic media which is tested in accordance to ASHRAE 52.2 standards. The synthetic polypropylene media is bonded to a metal backing giving it it`s aerodynamic form. The media pack is enclosed and bonded at all points into a heavy duty, moisture resistant, beverage board frame. The Taff Pleat MERV 10/11/13  is a very popular choice for upgrading filter efficiency for roof top and stand alone units from MERV 7 & 8.

Taff Guard`s Synthetic and Fiberglass Disposable Filters are made with a sturdy beverage board frame, unaffected by humidity and suitable up to a maximum operating temperature of 200F.  A progressively dense polyester filter media increases dust holding capacity.

Synthetic/Polyester Media is designed to provide a higher level of filtration over Fiberglass products. Polyester media is non-shedding, hypoallergenic and easier to handle than fiberglass. It is an economical method of upgrading your ventilation system because it is more efficient and offers a better holding capacity. Antimicrobial treatment is available and can be ordered dry or with an adhesive.  Available in a wide range of sizes.

Our Aluminum Filter is made of aluminum foil expanded from various thicknesses into a number of different patterns. Through an exclusive manufacturing process, the layers are then bonded together to form a baffle type design. Used in ventilation and air conditioning systems; in hot air systems and in exhaust hoods. Grease and dust gather on hundreds or surfaces with no risk of loss of pressure or obstruction.

Electrostatic Permanent Air Filter features 3-Stage filtration in one. It contains and carries electrostatic charge throughout the filter, which serves as a magnet that attracts airborne contaminants. The Electrostatic Filter is an excellent replacement filters for traditional synthetic filters. Comes with a Lifetime Warranty.

The Fiberglass Pocket Bag is designed to remove smoke, fumes, bacteria, fungi and other virus bearing contaminants. This high efficiency bag filter is also excellent for removal of atmospheric contaminants such as pollen, dust, and smog. It is available in MERV 9, MERV 12, MERV 13 and MERV 14 efficiencies.

Two Layer Link Panel filters are designed to fit any standard application and cross draft paint booths. Normally, this filter is installed in the paint booth doors. In addition, it can be installed in low pressure HVAC systems. The use of link panel filters in side access systems facilitates the changeout of the filters.

Dustguard panels are designed for crossdraft and downdraft booths when a higher quality paint is used. It also can be installed in low pressure HVAC systems where a higher level of filtration is required. The use of linked panels in side access systems facilitates the changeout of the filters. Dustguard filter is constructed of two synthetic media layers. The first layer of white polyester acts as a prefilter. The second stage is a dual density synthetic media with an added adhesive. Dustguard media is non-toxic and non-allergenic. The adhesive prevents the migration of dust particles and increases its dustholding capacity.