Totalien Endustriyel Urunler San. Tic. Ltd. Sti. products

The PLUGLINE pipe stoppers are designed for quick and reliable sealing and blocking of sewers, pipes, gullies and drainages. They are recommended mainly in case of repairs, maintenance, failures, and they are ideal for leak inspections by performing hydrostatic testing. When performing hydrostatic testing, these plugs are placed at the other ends of the pipes to block the pipes under test. Another common use of pipe stoppers are  to prevent the ingress of water, gases, construction waste, dust, rat and rodent into a newly constructed pipe lines.

Multi size metal core Bypass pipe stoppers are used for repairing and testing of sewage pipes, newly constructed or refurbished pipelines. They are kind of pneumatic stoppers, only difference between the other stoppers is the large-diameter bypasses inside as metal core, stainless steel byspass is covered by high quality rubber. Due to its large diameter bypass, it is used to divert the flow of high flow water or any fluid to another direction.

Inflatable medium size pipe stoppers are named due to their lenght which between inflatable pipe stoppers and short pipe stoppers lengths. They are available as standard product line ranges from 50mm up to 400mm diameter, larger sizes should be available upon request. Designed with an eyebolt to handle simplify manipulation of the plug, lightweight, most sizes can be installed by one man similarly to the small pipe stoppers.

Inflatable small pipe stoppers are named due to their length, they are suitable for special application conditions needed short lenght and less heavy stoppers, most sizes can be installed by one man. They are used at sewer connections, blocking pipes and leak testing of newly constructed  and refurbished pipelines. The difference that distinguishes it from Inflatable Pipe Stoppers is at their lenght. PLUGLINE small pipe stoppers are made of high quality rubber material. Standard productions with diameters from 20 mm to 1000 mm are available, larger sizes should be available upon request. Designed with an eyebolt to handle simplify manipulation of the plug, Lightweight, most sizes can be installed by one man.

The PLUGLINE inflatable test plugs offered here are the right choice for repairs, maintenance, or leak tests of newly constructed or refurbished pipelines. Hydrostatic testing is essential in pipelines and sewers to ensure their safe and effective operation. Tests are carried out to control faults such as cracks, leaks, welding defects in these pipelines and sewers, To perform the test, the ends of the pipeline are blocked with the inflatable test plug and the Inflatable pipe plug, the pipes are filled with water and pressurized to a predetermined test pressure.

Multi size metal core test plugs are kind of pneumatic test plugs, they are manufactured with big size metal core inside as bypass, they are used for repairing and testing of sewage pipes, newly constructed or refurbished pipelines without stopping its normal flow. The only difference between pipe test plugs is the large-diameter bypasses inside. It is ideal for directing the flow where the flow is heavy, they can be produced more then one bypass and bigger diameter bypass according to the special technical needs and the specific use. Mostly used also during the technical support to repair of sewers/pipelines/drainage systems/gullies, to divert the flow via bypass in them. They are made of reinforced rubber which cover the metal core inside, being produced between 70mm to 1200mm diameter.

Inflatable medium test plugs are named as medium because of their lenght, their lenght is between test plugs and small test plugs. Like as other test plugs, they are used for leak tests by air or water. They have lightweight, most sizes can be installed by one man and with an eyebolt to handle simplify manipulation of the plug. All other plugs, they are made with high quality rubber and metal items for anticorrosion. The standard product line covers pipe diameters range from 50 mm to 400 mm with 2,5 bar/36,25 psi working pressure.

Inflatable small test plugs are suitable for testing special application conditions of  drainage systems, pipelines, sewers and gutters needed short lenght and less heavy plugs,  especially suitable for testing of house connections. They are also commonly used for this purpose when it is necessary to bypass the water flow in the pipes. The standard product line covers pipe diameters range from 30 mm to 1000 mm witn 2,5 bar/36,25 psi working pressure.

High-pressure pipe stoppers are used in applications in which a standard stoppers back pressures cannot be enough for withstrand of flow. High pressure pipe stoppers provide a pressure barrier that provides blocking and work safety for employees, Safe to use in areas of critical infrastructure failure, areas of uncontrolled flow where “hot work” pipeline repairs are made to hold high back pressure, and where temporary to long-term pressure barriers are required. Equipped with eyelets bolts to be moved easily and placement into the pipes. Available for pipe diameters from 50 mm (1,96") to 2000 mm (78,74"). If requested more. Produced at the working pressures 6,0 Bar (87,02 psi), 12,0 Bar (174,04 psi) up to the 130,0 Bar (1885,49 psi). Usable for temperatures from -40 °C (-40 °F) to 70 °C (158 °F). Providing have high resistance to circumference affect.

High pressure pipe test plugs are required by many industries at pipelines and sewers that perform hydrostatic tests to verify the flow integrity of equipment tasked with handling fluids, often these tests are performed on a regular basis. High pressure pipe test plugs provide a safe pressure barrier for workers in the areas to be tested, Used to divert flow direction via bypass temporary to long-term in "hot work" pipeline repair areas, maintenance situations, areas with uncontrolled flow where the flow direction needs to be diverted to the another directions.