Trailer Engineering products

This fuel caddy also known as the 110 litre bunded diesel bowset is the perfect fuel storage solution for distributing smaller amounts of Diesel, Oil and Adblue to your equipment. This bunded fuel caddy can be wheeled around as it has been designed and manufactured to similar features as a wheelie bin. This fuel tank is constructed from polyethylene to ensure a clean fuel storage solution whilst making the product a lighter weight than its steel alternative in order to give the operator easier manoeuvrability. This product can be configured for the storage and distribution of Diesel, Oil, Adblue and Water. The water caddy configuration can be fitted with an additional handwashing basin (sink and taps).

BENEFITS of 200 litre truck master fuel bowser for pickup trucks:Increased mobility to reach places a fuel bowser/tanker cannot get to. Fuel can be transported without the need for steel drums or jerry cans which are liable to spill. No rust, less condensation and no contamination as the unit is completely sealed. This fuel bowser is manufactured from UV-protected medium density polyethylene. It is light and tough.

Trailer Engineering supply many planthire, event and film location service companies with drinking water bowset(s) to keep their locations supplied with water. This 110 litre drinking water bowset is a handy addition to the industry as it can be pushed around full by one person supplying drinking water (potable water) or grey water (waste water) to a designated area. The 110 litre drinking water bowset can be supplied with a wash basin making it perfect for events or festivals. When supplying potable water (drinking water) the bowset will have to be manufactured from a specialist blue polyethylene as it is secretary of state approved for drinking water. Other colours are available for waste water (grey water).

The 500 litre water & drinking water highway bowser is available for potable water (drinking water) or grey water (waste water) fitted into Trailer Engineering`s fully approved highway towable water bowser trailer. This drinking water highway bowser can be configured for many applications including flower watering, pressure washing, dust suppression, feeding welfare units and feeding animals water via a trough. For a drinking water highway bowser (potable water), the tank needs to be constructed from a specialist blue polyethylene which is fully secretary of state approved. Other colours are available for grey water.

ENGINE: HATZ Super Silent 12v Start Silent Pack12hp Diesel Engine. PUMP: WS201 Interpump. DRIVE: Belt Drive. WORKING PRESSURE: 200 Bar. FLOW RATE: 15 Litre/Min.

Trailer Engineering offer a full range of pressure washers. The standard Pressure washer they offer is the 3000 psi diesel Yanmar pressure washer as it is the favourite amongst the Planthire and Construction industries. Fitted onto a robust highway towable trailer, complete with a polyethylene water tank. This water bowser and pressure washer is also available on site tow able trailers and static skid base bowsers. As manufacturers Trailer Engineering offer a

Constructed from a robust fully welded chassis the 1125 litre water bowser is a very capable machine on building sites. This product is fully customizable as it can be configured for multiple applications with a variation of pressure washers available. The standard site towable pressure washer water bowser offers a 3000 psi diesel electric start jet washer, there are also petrol pressure washers available. This water bowser can be fitted with a additional dust suppression systems to sit along side the pressure washer. Dust suppression kits offer the splash plate and spray bars operated by a Honda wx10 or the new Rainmaker combo.

Tank 450L Capacity, cylindrical in section, with dished and flanged ends fully welded, constructed from 4mm mild steel, 18” bolt on access manlid cover, 1” bottom outlet with locking ball valve c/w cam lock cap, 1” suction inlet in top of tank, contents sight Glass on tank with locking ball valve, prevac gauge, pressure relief valve set at 3psi, high level ball cut out with secondary cut out in line to vacuum compressor pump. Whole tank hot dip galvanized to BS standards.

Trailer Engineering have a dedicated R&D team that can design and manufacture a range of vacuum tankers to suit your requirements.

Cylindrical in section constructed from 4mm stainless steel, fitted with an internal partition, 200L Chemical tank with 2” filler and cap, connected to a 12V pump fitted with an in-line pressure relief valve, spring rewind hose reel and 30ft of 1” hose with a breakaway coupling in line and a 1” aircraft toilet water connector, 3 chemical resistant content sight glasses in end of tank.