Trident Pneumatics Private Limited products

Refrigerated and heatless are two broad categories of air dryers available these days. Talking about air dryers remains incomplete without mentioning the concept of dew point temperature. It is the unit used to measure the dryness of compressed air. At this temperature, the moisture present in the compressed air in vapour form condenses to form liquid. Similarly, pressure dew point temperature and atmospheric dew point temperature are the two distinct temperatures of compressed air when under any kind of pressure and atmospheric pressure respectively. When we talk about the most advanced and cheapest mode of drying compressed air, refrigerated air dryers are quintessential.

A majority of the Industrial Compressed Air Systems and different other applications of gas and/or air dryers involve the use of Heatless Compressed Air and/or Gas Dryer systems. High Pressure Gas and Air Drying Systems also involve the use of these compressed air and gas dryers in many of their applications. Trident Pneumatics excels in Heatless desiccant air dryer manufacturing

Trident makes a range of adsorption type compressed air dryers which are regenerated by heat. The adsorbants activated alumina or molecular sieve renegenrates on heating. These type of Dryers are energy efficient for dew points below -20 deg C for large air flows. There are several ways heating the bed of desiccant.

Trident has always been a prominent name for air and gas solutions and with our high-quality products and consistent tech development we have become a leading Medical Air Dryer Manufacturers and Medical filter suppliers. The TBAS medical dryers operate with the principle of Pressure Swing Adsorption, hence removing more moisture than refrigeration air dryers, and delivers moisture free dry air consistently irrespective of flow variation.

In the progression of Automatic drain valve manufacturing technology, Trident’s condensate sensing type automatic drain valves are the newest. Quintessentially useful and reliable, these valves sense the condensate level for activation instead of working through the cycle timer. The capacitance type of sensor, which can work on all types of condensates like water, water plus oil, water plus oil plus dust and more as such, detects the gradual rise of the level as the condensate starts collecting in the drain valve. The controller on the other hand signal the valve to open when the condensate reach the upper level. The condensate now drains slowly reaching the lower level. The controller thereby switches off the valve hence stopping the draining.

The CTD valve series represents the ultimate in valve performance. Decades of experience of valve manufacturing have allowed us to identify the issues commonly associated with drain valves and undertake the necessary improvements required. Today the CTD valve incorporates an ultra-reliable MCU,which features dual control of both drain cycle and drain valve open-time. The oversized orifice design and a specifically designed solenoid operator section allow rapid discharge of dust and particles.

Any kind of pneumatic tool perform its best when it is filtered of the various contaminants at regular intervals of time. These contaminants could be dirt, oil and water that come unfiltered through compressed air. The oil and water mostly exist in liquid or vapour forms. Getting rid of these contaminants is a must to prevent any unfavourable effects on your end products. Trident produces coalescing filters that help remove liquid oil and water. The Micro filter manufacturers process consists of a filter media made up of boro silicate micro glass fibres. On the other hand, the oil in vapour form is removed using activated carbon filters.

Designed for locomotive use, Non volatile memory system, Automatic Purge control valve, Fixed Volume Automatic Drain valve.