UC Marine (China) Co., Ltd products

CWR series horizontal hot water circulating pump driven by a marine motor,commonly be used for circulation of boiler hot water[fresh water) on the sea or river shipping.The feeding hot water must not higher than 200*C.water inlet pressure not higher than 1.6Mpa.cooling water capacity between 0.6M3/h to 1 M3/h and water temperature not higher than 40°C . The pump rotates clockwise viewed from motor.

The CJY series marine vertical deep-well oil pump is used to pumping lubricating oil and it is driven by motorBecause of the long shaft of the pump.it is able to used for the circulation between the up cabin and the down cabin.it can be replaced the bulkhead drive device.which used with horizontal pump ago.The pump features in small occupation of floor.high efficiency,easy operation and easy maintenance.The pump is used to pumping oil in oil tanker primarily. The pump rotates clockwise viewed from the top of motor.

The dose combination of dredging pump with hydraulic coupling to form a separate unit gives a smaller length and floor space.

The CWFseries marine horizontal water sealing pump is suitable to the protection pump on dredger where it is used to seal the water.lt is also suitable to the bilge pump,cooling pump and fire pump on boats.lt may be used to deliver the sea water.fresh water or other non-corrosive liquid medium lower than 80°C The pump rotates anticlockwise viewed from motor.