Uponor Ltd. products

ProPEX EP opposing-port tees feature 1" through 2" ProPEX flow-through connections with opposing 3⁄4" ProPEX branch outlets. The tees are made of engineered polymer, which is proven in demanding hot-water applications. Note: ProPEX tool is required. ProPEX rings sold separately.

ProPEX 1" copper branch manifolds feature 1/2" ProPEX LF brass outlets brazed to the manifold trunk. Sweat manifolds together to create the desired number of outlets. Do not exceed acceptable flow rates for 1" nominal copper. Note: ProPEX tool is required. ProPEX rings sold separately.

Uponor`s 1" Copper Manifold is 6 feet in length and features 24 individual 1⁄2" ProPEX lead-free brass outlets spaced three inches on center.1 The manifold is suitable for cutting to any length necessary to achieve the desired number of outlets. ProPEX Tool is required. ProPEX Rings are sold separately.

LF brass compression (quarter-turn) stop valves are chrome-plated and available in angle or straight configurations. Stop valves are used for point-of-use shutoff at the fixture. Both styles connect 1/2" Uponor AquaPEX tubing to 3/8" outside diameter (O.D.) risers. Note: Includes compression inserts and rings for the 1/2" PEX connections.

Quik Trak installation tool kits offer labor-saving speed for Quik Trak installations. The kits feature a lightweight, easy-to-use screw gun with an extension arm to reduce fatigue. The kits include a 120VAC screw gun with vertical extension arm, square-head drive screw bits, bit-retrieval tool and hard-sided case.

Manifold supply and return ball valves are full-flow, 11⁄4" ball valves with R32 male by R32 union nut that fits directly on the TruFLOW Jr., Classic and EP manifolds.

ProPEX engineered polymer (EP) reducing tees make diverting connections for Uponor crosslinked polyethylene (PEX-a) pipe for use in hot and cold domestic potable water systems, residential fire sprinkler systems and hydronic radiant heating and cooling systems. Each end of the tee is manufactured with an Uponor ProPEX fitting for connections to Uponor AquaPEX or Wirsbo hePEX pipe.1 Note: Branch size is listed last in the part descriptions.

Recessed sprinkler wrenches quickly and easily allow access to service LF recessed pendent and LF recessed horizontal sidewall sprinklers.

ProPEX LF brass iron pipe size (IPS) groove fitting adapters provide a direct connection to groove connections designed to meet CSA B242-05. These fittings are IPS on the groove connection side. Note: ProPEX tool is required. ProPEX rings sold separately.

ProPEX brass ball valves are a cost-effective alternative for radiant heating/cooling and hydronic piping applications. Both ends are manufactured with the ProPEX fitting for connections to Uponor PEX pipe. The full-port valves are compatible with propylene glycol mixtures up to 50%. Stem extensions can be installed to accommodate up to 2" of pipe insulation. Note: ProPEX brass ball valves are not approved for potable-water applications.